Aerocool Falcon V2 MDI Tower, Tempered Glass - black [ACCM-PV41143.11]

- Four pre-installed ARGB fans give the case a unique finish
- Depending on your preference, air or water cooling is possible
- Small to medium motherboards up to ATX size
- Graphics cards fit up to 290 mm in length
- Three additional drives in the hard drive cage/ behind the mainboard tray
- Power supply cover structures the inner workings
- USBs on the I/O panel: 2x USB 3.0 and 1x 2.0

The Aerocool Falcon Midi Tower in detail
Always keep an eye on your build, the Aerocool Falcon enchants all owners with its ARGB fans. With the tempered glass on the side, it's hard not to keep an eye on your build. The midi tower looks very good on desks. The mesh front lets you create quiet, high-performance airflow so it doesn't bother you while gaming.

The Airflow: Work on an air or water cooling system
Aerocool makes it as easy as possible for you. Four fans are already pre-installed in the Falcon. Three in the front and one in the back, they promote the overpressure in the PC, with which a lot of excess air escapes from the PC through openings. So you don't have to buy any extra fans, the air cooling works perfectly.

For high-end systems that need more cooling, additional fans can still be used in the top or bottom to relieve the graphics card heat. There are two 120 mm fans each, which can be placed on the power supply cover or in the lid.

However, you also have the option of doing without a CPU cooler and using an all-in-one water cooling system. Radiators can be mounted in the front or rear. They must not exceed the length of 360 mm at the front and 120 mm at the back!

Your build: organizing hardware
All mainboards up to ATX format fit into the Aerocool Falcon. CPU coolers must not be higher than 157 mm and graphics cards up to 290 mm in length can be accommodated. Danger! This information only applies without the use of a radiator in the front.

A total of three drives find their way into the case. As long as there are two 3.5 inch HDDs in the hard drive cage with a 2.5 inch SSD behind the mainboard tray. Or you don't use an HDD for an SSD on the drive cage. A standard ATX power supply can be installed next to the hard drive cage.

The power supply cover distinguishes the Aerocool. It helps to sort cables better and thus keep the overall build of the PC clean. There is 17 mm of space behind the mainboard tray for cable management.

All common connections can be found in the I/O panel
The I/O panel gives you quick and easy access to two USB 3.0 ports and one USB 2.0. If your PC hangs up or you want to restart it quickly for another reason, you will also find a button for this. HD audio is also provided! A microphone and headphones can be connected.

Enhance your look with RGB lighting
ARGB fans are pre-installed in the Aerocool Falcon. Their special feature is that LEDs can be controlled individually, which results in great effects. In combination with the mesh front, this results in a stylish design, which is further enhanced by additional RGB components. But the case itself is eye-catching enough and is also happy about a quiet interior.

Technical details:
- Dimensions: 206 x 457 x 357 mm (W x H x D)
- Material: steel
- Color: Black
- Form Factor: ATX, Micro-ATX, Mini-ITX
Fan total possible:
- Front: 3x 120mm, 2x 140mm
- Lid: 2x 120mm
- PSU cover: 2x 120 mm
- Rear: 1x 120mm
- Of which pre-installed:
- - Front: 3x 120mm
- Rear: 1x 120mm
Radiator mounts:
- Front: 1x 120/ 240/ 360 mm
- Rear: 1x 120mm
- drive bays:
- Hard drive cage: 2x 3.5 inches / 1x 3.5 and 1x 2.5 inches
- Motherboard tray: 1x 2.5 inch
- Expansion Slots: 7 (horizontal)
I/O panel:
- 2x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
- 1x USB 2.0 (Type A, max 480 Mbit/s)
- 2x 3.5 mm jack (3-pin, for microphone/headphones)
- 1 x power button
- 1x reset button
- Maximum graphics card length: 290 mm (without front fans installed)
- Maximum CPU cooler height: 157mm
- Power supply: max. 154 mm length