Aerocool Beam-G-BK-v2 Midi-Tower, Tempered Glass - black [ACCM-PV37043.11]

- Tempered glass side panel
- Front panel with ventilation grille for optimal airflow
- Vertical mounting of the graphics card possible
- Space for optional fans on the power supply cover for additional cooling
- Radiators at the front, in the lid or at the back possible
- Graphics cards up to a length of 343 mm possible
- Maximum CPU cooler height of 160 mm
- Airflow-optimized midi tower with tempered glass

With aerocool's Beam-G-BK-V2, you don't compromise when it comes to cooling your components. It is equipped with a power supply shaft and is optimally prepared for air and water cooling through the openings in the front

side panel is made of tempered glass and allows a good view of the installed components. With the vertical expansion bays, graphics cards can be easily mounted vertically with the help of an optional riser cable. With the I/O panel, you have easy access to the data and audio ports.

Outstanding airflow and dual-chamber design
When developing the Beam-G-BK-V2, Aerocool focused from the outset on cooling the components. The housing is very open and designed for trouble-free airflow. The front has a mesh in the form of a perforated grille and thus ensures an unhindered air flow. The three 120 mm FRGB fans behind it ensure sufficient fresh air supply, another integrated 120 mm fan on the back transports the heated air out of the case.

At the front there is space for either 3x 140mm fans or 3x 120mm fans. On the lid 2x 120mm or 2x 140mm and on the back a 120mm fan. Dust filters that are easy to clean against dust are also attached to the lid and floor.

The power supply cover shields the power supply from the rest of the chassis. This ensures that the waste heat from the power supply does not enter the main chamber of the case, where the other warm components are located and thus lower temperatures are achieved inside the housing. For further cooling, there is space on the lid of the power supply bay for two 120mm fans, which can provide generally better ventilation of the hot air in the case due to their airflow.

Sufficient space for water cooling and components
The Beam-G-BK-V2 offers the possibility to install ATX, Micro-ATX and Mini-ITX motherboards. Thus, you have a large selection of platforms and configurations. In addition, CPU coolers up to a height of 160 mm and high-end graphics cards can be accommodated up to a maximum length of 343 mm without a radiator at the front. If you are planning to install water cooling, you will not be disappointed here either. In the front there is enough space for a 360mm radiator. Radiators up to a size of 280 mm and a maximum height of 53 mm can be placed at the top of the housing. The back offers the possibility to use a 120 mm radiator, for example for small all-in-one water cooling.

Plenty of space and simple design
You don't have to worry about enough mounting options for your storage media with this case either. Two 3.5- or two 2.5-inch data carriers can be accommodated under the power supply cover. Two 2.5-inch drives can then be mounted on the motherboard tray. Thus, enough memory is available for every area of application. For power-hungry hardware, optional ATX power supplies up to 189 mm in size (with cables) can be placed under the cover.

The simple, black design of the Beam-G-BK-V2 makes it possible to build even inconspicuous builds with good cooling performance. The housing is made of hardened, 0.5 mm thick SPCC steel, which gives the case its robustness. The side panel is made of tempered glass, which is why it provides a good view of the internal components. Thus, nothing stands in the way of an eye-catching RGB build. The I/O panel does not let fans of mobile data carriers down. It comes with power button, reset button, HD audio and microphone port, as well as two USB 2.0 and one USB 3.0 Type-A port for faster transfer of files.

Specifications:
- Dimensions: 210 x 481.5 x 404 mm (W x H x D)
- Color: Black
- Material: SPCC steel, ABS plastic, tempered glass
- Form factor: ATX, Micro-ATX, Mini-ITX
Total fans possible:
- 3x 120mm / 140mm (front)
- 2x 120mm / 140mm (lid)
- 1x 120mm (back)
- 2x 120mm (power supply cover)
- Fan pre installed:
- 1x 120mm fan (rear)
Radiator mounts:
- 1x max. 280 / 360 mm (front)
- 1x max. 240 / 280 mm radiator (top, max. 53 mm height with fan)
- 1x max. 120 mm (back)
- Dust filter: bottom and top (removable)
Drive bays:
- 2x 3.5 inch or 2x 2.5 inch (HDD cage)
- 2x 2.5 inch (motherboard tray, front)
- Power supply: 1x standard ATX up to 189 mm length (incl. cable)
- Expansion slots: 7+2
I/O panel:
- 2 x USB 2.0
- 1x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
- 1x HD audio (3.5mm)
- 1x microphone connection (3.5 mm)
- Maximum graphics card length: 343 mm (without front radiator)
- Maximum CPU cooler height: 160mm
Scope of supply:
- 1x Aerocool Beam-G-BK-v1 midi tower
- 4x 120mm FRGB fans (pre-installed)