- Striking lighting on the front with two ARGB LED strips
- A pre-installed 120mm PWM fan with ARGB LEDs on the rear
- Control of the RGB lighting via the mainboard as standard
- Tempered glass side panel for an unobstructed view of the interior
- For mainboards in the form factor E-ATX to Mini-ITX
- Vertical installation of the graphics card with optional riser card possible
- Radiators up to 360 mm on the front and 240 mm on the lid possible
- I/O panel with 2x USB 3.0, 2x USB 2.0 and HD audio input and output
- Graphics cards up to 360 mm, CPU coolers up to 175 mm, power supplies up to 180 mm
Kolink Void X: for E-ATX motherboards and high-end GPUs
An E-ATX mainboard fits into the Kolink Void X in the appealing white of the midi tower and on the front there is a striking X with an infinity mirror effect, which is accentuated by strips with digitally addressable RGB LEDs. In addition to this impressive aesthetic upgrade, the Kolink Void X also brings impressive hardware support. Graphics cards can also be installed vertically, for example, and there is space for two radiators.
This combines aesthetics with optimal cooling
A 120 mm PWM fan with digitally addressable RGB LEDs is installed on the back of the Kolink Void X ex works. There is also room for three 120mm or two 140mm fans on the front and two 140mm or 120mm fans on the top. Alternatively, radiators up to 360 mm in size can be placed on the front or 240 mm radiators on the lid.
The ARGB lighting of the pre-installed fan and the two ARGB LED strips on the front is wired by default so that it can be controlled via a mainboard with a 5VDG slot. If you want, you can change the wiring so that the digitally addressable RGB LEDs can be set using the combined RGB/reset switch on the I/O panel. The hardware in the interior can be admired through the tempered glass side panel. Side air intakes on the front provide additional ventilation.
The Kolink Void X: focused on gaming hardware
The interior is completely black. A power supply cover hides the cabling, the optional ATX power supply and an HDD cage, thus ensuring a tidy look. Two 3.5-inch or 2.5-inch drives can be accommodated in the HDD cage. Two more 2.5-inch data carriers can be attached next to the mainboard. With 24 mm, there is enough space behind the mainboard tray for cabling, numerous openings there and in the power supply cover facilitate cable management. A removable dust filter on the bottom and a magnetic filter on the top keep the interior clean.
Graphics cards can be up to 36 cm long, CPU coolers up to 17.5 cm high. Graphics cards can also be installed vertically using an optional riser card. In addition, there are plenty of connections for peripherals on the I/O panel with two USB 3.0 and two USB 2.0 ports. In addition to the combined reset/RGB control switch, there is also a 3.5 mm jack for headphones and a microphone.
Technical details:
- Dimensions: 210 x 453 x 415 mm (W x H x D)
- Material: steel, tempered glass, plastic
- Weight: about 6.5 kg
- Color white
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
- Fan total possible:
- 3x 120mm / 2x 140mm (front)
- 2x 120/140 mm (lid)
- 1x 120mm (rear)
- Of which pre-installed:
- 1x 120 mm (rear, ARGB, PWM)
- Radiator mounts:
- 1x 360/280/240 mm (front)
- 1x 240 mm (lid)
- Filter: top, bottom
- drive bays:
- 2x 3.5/2.5 inches (internal)
- 2x 2.5 inch (internal)
- Power supply: 1x standard ATX (optional)
- Expansion slots: 7+2
- I/O panel:
- 2x USB 3.0 (internal connection)
- 2x USB 2.0 (internal connection)
- 1x 3.5 mm jack (4-pin / TRRS, audio in/out)
- RGB/Reset switch
- Maximum graphics card length: 365 mm
- Maximum CPU cooler height: 175mm
- Maximum PSU length: 180mm