Zalman T5 Micro-ATX Case - Black [ZM-T5]

The T5 is like its predecessors T1 to T4 a genuine Tower, just only in a reduced version. It is simply decorated and noble and white with a nice front design with the brushed metal appearance and its consistent black coloring to please. Note the mounting options for fans. A small gaming Boliden with excellent cooling, therefore there is no obstacle.

The I / O panel located on the cover and contains two USB ports, one of which corresponds to the standard 3.0, audio ports and power and reset button. Behind the front, a 120-fans are installed, through the vents at the bottom of the front disks are the same also cooled. At the side part even two 120-mm fans so affixed. A 92-mm fan has been installed in the rear, which ensures that heated air is transported from the Case Zalman. The power supply unit is in the back at the bottom of the housing and only vented itself - its air intake as well as equipped in the front and to the side panel with dust filters.

The interior is fortunately as the Tower kept itself completely in black. This is modern and optically a real highlight. But even with installation options and features not short the Zalman ZM-T5. So a 2.5-inch drive can on a tray on the right side are installed vertically, to behind the front two 3,5er drives, also in a vertical orientation. Above there is the possibility to install a 5.25-inch drive, a matching visor has the T5 already. Furthermore, can be below the external 5.25-slots and on the ground in each case a 2.5-inch drive attach. In addition to micro-ATX boards also boards can be used in the Mini-ITX form factor, power supplies can handle the T5 in the ATX standard. These four expansion cards, including graphics cards with a length of 300 mm can be installed.

Other features like a good cable management, hose guides, pre-installed dust filter, vibration-inhibiting rubber or abegerundeten edges inside the case make this case at a price-performance hit.

Technical Details:

    Dimensions: 170 x 427 x 348 mm (W x H x D)
    Material: Steel
    Color: Black
    Form Factor: Micro-ATX, Mini-ITX
    Fan:
    1x 120 mm (front, optional)
    1x 92 mm (rear, pre-installed, 1,500 rev / min)
    2x 120 mm (side wall, optional)
    Filters: front, side, bottom
    Drives:
    1x 5.25 inches (external)
    2x 3.5 inch (internal)
    3x 2.5 inch (internal)
    Power supply (optional): Standard ATX
    Expansion Slots: 4
    I / O Panel:
    1x USB 3.0
    1x USB 2.0
    1x per Audio In / Out
    Maximum video card length: 300 mm