It is made of the highest quality materials, is excellently processed and offers a simple assembly as well as an extremely easy way to fill the reservoir. A total of 500 ml of cooling liquid can be accommodated by the expansion tank, which has two G1 / 4-inch connections, is internally equipped with an anti-cyclone inlay and can be mounted directly on a D5 pump thanks to the pump adapter.
The Watercool Heatkiller Tube 200 D5 Balancing tank at a glance:
Modular expansion tank made of high-quality materials
Flow-optimized pump chamber for D5 pumps
Space for 500 ml of coolant
Two G1 / 4-inch threads in the ground
Less turbulence thanks to anti-cyclone inlay
High adaptability thanks to practical accessories
First-class workmanship and high-quality materials
The Heatkiller Tube 200 D5 Watercool expansion tank is made of a variety of materials that provide the best conditions for low-maintenance water cooling. The 500 ml tube consists of borosilicate glass which, thanks to its properties, is extremely scratch-resistant and also has a high chemical and thermal stability.
The lid and bottom are made of black POM, the bottom of which is a pump adapter for D5 pumps and has a flow-optimized pump chamber, so that less turbulence is produced, and the flow and the ventilation capacity are equally positively influenced. The side braces are made of anodized aluminum in black and can even be replaced by optional color variations. The anti-cyclone inlay integrated in the expansion tank consists of stainless steel and suppresses swirling, which can usually occur in expansion tanks. This reduces the noise level and improves the venting behavior of the compensating tank.
In order to integrate the expansion tank into a water cooling circuit, two G1 / 4-inch connections are provided in the bottom of the expansion tank to allow the installation of hoses, tubes or other accessories. Thanks to the huge filling opening in the cover of the Tube 200 AGB, which thanks to the bayonet closure can be opened very easily and absolutely without tools, the system can be filled very easily.
Dimensions: 70 x 70 x 303.4 mm (L x W x H)
Length of tube: 200 mm
Diameter of tube: 65 mm
Borosilicate glass (reservoir)
POM (lower part / upper part)
Stainless steel (inlay)
Weight: 960 g
Fill volume: approx. 500 ml
Connections: 2x G1 / 4-inch
1x Heatkiller Tube 200 D5
1x assembly instructions