The biggest revision compared with their predecessors learned during Heatkiller IV, the cooling structure. Thanks refined micro fins to the cooling medium is now a much larger contact surface to the cooler is available, to which the heat transfer takes place. But the approach flow was further optimized. Compared to the previous model, the cooling performance was again increased by up to 3 degrees Celsius by these improvements.
Also, the flow benefits from the optimization measures, especially Watercool has incorporated a large volume exported collecting ducts in Heatkiller IV. The copper base and lids with stainless steel fittings and a great visual Custom Water cooler comes with an impressive high-flow design, which also makes them the perfect partner for less powerful pumps.
The new cooling structure of the Water Heatkiller IV, which is offered here in the high-end "Pro" version, way, comes entirely from without nozzle plate. The waiver increases the reliability of the passive radiator, as can accumulate less dirt particles in the cooling structure in this concept. Even with the equipment a lot has changed.
So the Heatkiller features like Basic IV Pro now has a comfortable Easy mount system. After the initial installation, the Processor cooler can at any time without tools on Intel motherboards with the bases in 2011 (V3), 115X or 1366 Dismantle or assemble. For not even need to remove the mainboard. The support system is assumed to reflect the contact forces. Incorrect installation is practically almost impossible.
Friends larger connection systems will appreciate the increased distance between the two G1 / 4-inch connection threads, which now amounts to 25 mm. Thus, the Heatkiller IV Pro for Intel compatible with all standard connector types, up to 19/13 and 16/10 mm OD / ID. The production of Heatkiller IV takes place in a modern CNC machinery in the German offices from Watercool.
This product is delivered without the necessary connections and without thermal paste. These are therefore sold separately. For Intel motherboards with the sockets LGA1150, 1155 or 1156 of Watercool offers an additional option to be purchased Stainless steel backplate to (WACP-249 in Dealer-range), which improves the security and stability of the Heatkiller IV.
- Dimensions (cooler): 59 x 17 x 66 mm (W x H x D)
- Material: Copper (base, lid) polished stainless steel (brackets)
- Seal: NBR 70
- Connectors: 2x G1 / 4 thread
- Distance: 25 mm
- Intel 1150, 1155, 1156, 1366, 2011 2011 V3
Scope of delivery:
- Water Heatkiller IV Water Block
- Mounting material
- Installation instructions
Attention: Please note that some coolers are shipped with a protective film on the bottom. These must be removed prior to installation and commissioning in each case. We assume no liability for damages resulting from corrupted or incorrect installation and improper use!