Thermaltake View 37 RGB Plus Midi Tower - Black Window [CA-1J7-00M1WN-01]

Because the big hit is the ability to install huge radiators with RGB fans next to the motherboard tray, which makes the View 37 a real eye-catcher. Another highlight is the two vertical PCI slot panels on the back of the tower, where a graphics card can be mounted upright, thus displaying the impressive cooler design of a pixel accelerator. The View 37 is the perfect showcase case!

The Thermaltake View 37 Midi-Tower at a glance:
Bent side panel in L-shape made of acrylic glass
Graphics cards up to 41 cm (without front fan), vertical installation possible
Space for a 360 mm radiator in the front and 420 on the right side
I / O panel with 2x USB 3.0, 2x USB 2.0 and HD audio
Front with tinted acrylic glass
3x preinstalled 140mm Riing Plus RGB fans
Thermaltake View 37: Ingenious design & high functionality
In addition to the impressive design, Thermaltake has also put a lot of emphasis on functionality in the View 37. In the front, a 360-mm radiator can be installed, if you want to do without the two preinstalled Thermaltake Riing 140-mm fan, which are supplemented by a third party at the back. There is even a 420 mm radiator on the right side in front of the motherboard. For the drive cage must be soft, but there are still enough slots for drives. Instead of the cage and the mainboard tray pumps and reservoirs / AGBs can be accommodated. The huge side panel allows the custom water cooling system to be admired from the side and top - perfectly staged by the stylish RGB lighting of the Riing fans.

If you prefer air cooling, you can install two 200 mm fans instead of the two pre-installed 140 mm Riing RGB fans - or three smaller 120 mm fans. Right next to the motherboard tray again have three 140- or 120-mm fan space.
Midi-Tower or Showcase? The Thermaltake View 37 is both!
For the installation of the graphics card, Thermaltake has also come up with something special for his showcase case. In addition to eight horizontal PCI slot covers, the case has two vertical PCI panels. Up to a maximum of 41 cm long graphics cards can either be installed as usual with the GPU cooler down, or vertically, pointing with the graphics card cooler to the window. This allows an impressive - maybe even RGB-lit - high-end gaming graphics card to be displayed. A corresponding holder is already attached to the housing, but can be removed later.

The combination of design and functionality make the View 37 a first-class midi tower. The design rounded off on both sides and the vertical mounting of the graphics card also give the case a showcase character.
With controller and control on a PCIe slot panel
The Midi Tower has dust filters on the side and under the power adapter, which is installed in front of a hard drive cage for three 2.5- or 3.5-inch data storage devices, and may be up to 220 mm long. Here Thermaltake has also installed four large rubber feet that dampen the vibration of the power supply. Up to eight additional 2.5-inch SSDs or four 3.5-inch HDDs can be attached behind the motherboard tray without tools.

The front consists for the most part of dark-tinted acrylic glass. In addition, the I / O panel is installed, which in addition to the obligatory audio connections and power / reset buttons has two USB 2.0 and two USB 3.0 ports. Thermaltake has included a controller with integrated switches to control fan speed and RGB lighting. Alternatively, the controller may be connected to a controller included in a PCIe slot panel included with the housing.

Technical details:
Dimensions: 261 x 538 x 525 mm (W x H x D)
Weight: approx. 12.7 kg
Material: Steel (SPCC), plastic, tempered glass
Color: Black
Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total fan possible:
2x 200 mm, 3x 140/120 mm (front)
3x 140/120 mm (right side)
1x 120/140 mm (back)
1x 120/140 mm (floor)
Preinstalled:
2x 140 mm Riing Plus RGB (front side)
1x 140 mm Riing Plus RGB (back)
Radiator mountings (without fan slots):
1x max. 360 mm (front)
1x max. 420 mm (right side)
1x max. 120 mm (back)
Filter: right side panel, power supply (removable)
Drive Bays:
3x 2.5 / 3.5 inches (internal, HDD cage, tool-free mounting)
8x 2.5 "or 4x 3.5" drives (internal, behind the MB tray)
Power supply: 1x standard ATX (optional)
Connections Controller:
1x 3-pin RGB digital In / Out
3x 9-pin fan
1x 4 pin PWM
1x 5-pin extension for PCI slot bezel
1x connection for SATA
1x switch Fan Speed
1x switch Light Mode
1x switch color mode
1x switch Light Speed
Expansion Slots: 8 + 2
I / O panel:
2x USB 3.0
2x USB 2.0
1x each audio in / out
Maximum graphics card length: 410 mm (without front fan)
Maximum network part length: 220 mm
Maximum CPU cooler height: 180 mm
Equipment:
4x spacers M3 x 6.5 mm
4x power supply screws 6-32 x 6 mm
24x 3.5-inch HDD screws 6-32 x 6 mm
41x motherboard screws M3 x 5 mm
8x motherboard screws 6-32 x 33 mm
20x fan screws T5 x 10 mm
32x Washers / Vibration Dampers (Rubber)
4x cable ties
1x motherboard speaker