Thermaltake View 22 TG Tempered Glass Midi Tower - Black [CA-1J3-00M1WN-00]

The Thermaltake View 22 TG Midi-Tower at a glance:

    Side part made of 4 mm tempered glass
    Front of tinted acrylic glass
    Accommodates up to seven 120 mm fans
    Graphics cards up to 400 mm
    Accommodates up to two 360mm radiators in front & lid
    Easy installation of pumps and general terms and conditions

Thermaltake View 22 TG: Modular design & high functionality

For the installation of the graphic card Thermaltake has given the case a lot of space. A total of seven horizontal PCI slot covers offers the case and has space for graphics cards with a maximum length of 40 cm. Through the transparent side window, the high-end gaming graphics card can be impressively displayed. The hard-glass side panel and steel case still weigh less than seven kilograms.

In addition to the eye-catching design, Thermaltake has also put a lot of emphasis on functionality on the View 22 TG. In the front and the lid, a 360 or 280 mm radiator can be installed. Alternatively, the housing accommodates three 120 mm and two 140 mm fans on the front and on the lid. There is room for another 120 mm fan on the backside, which Thermaltake also supplies at the same time. A CPU cooler with a maximum height of 160 mm can also be accommodated in the Thermaltake View 22 TG.

Two 2.5- or 3.5-inch data storage devices can be installed in a drive cage. Behind the motherboard tray and on the power supply cover there is room for another two 2.5-inch drives. The power supply itself has a total space of 160 mm. The front bezel I / O panel has two 3.0 ports in addition to the mandatory audio ports and power / reset buttons.

Technical details:

    Dimensions: 223 x 491 x 467 mm (W x H x D)
    Weight: approx. 6.95 kg
    Material: Steel (SPCC), plastic, tempered glass (4 mm)
    Color: Black
    Form factor: ATX, Micro-ATX, Mini-ITX
    Total fan possible:
    3x 120 mm or 2x 140 mm (front)
    3x 120 mm or 2x 140 mm (cover)
    1x 120 mm (back)
    Preinstalled:
    1x 120 mm (back)
    Radiator mountings (without fan slots):
    1x max. 360 mm (front side)
    1x max. 360 mm (lid)
    1x max. 120 mm (back)
    Filter: front, bottom, lid (each removable)
    Drive Bays:
    2x 2.5 / 3.5 inches (internal; HDD cage)
    4x 2.5 inches (internal, behind MB tray, on the power supply cover)
    Power supply: 1x standard ATX (optional)
    Expansion Slots: 7
    I / O panel:
    2x USB 3.0
    1x each audio in / out
    Maximum graphics card length: 400 mm
    Maximum network part length: 160 mm
    Maximum CPU cooler height: 160 mm