The two lateral elements and the floor are made of U-shaped plastic with a black finish and provide sufficient stability. The front is also made of a black plastic frame with embossed Thermaltake logo on the left side. The informative LCD display is optimally incorporated into the holder and runs almost the entire length of the 5.25-inch model. A real eye-catcher for your case, especially since it can be illuminated in up to 16 different colors!
A total of six fans can be connected and controlled via 3-pin. The connections were however housed in a 4-pin socket, which can also connect 4-pin PWN fan to the fan controller. However, these are then not controlled by the PWM signal, but like all other fan also, via the voltage. In addition, include a whopping six temperature sensor supplied, which can be freely placed and individual monitoring of heat generation allows to control the cooling effect directly.
The Thermaltake Commander F6 can provide at each of the six channels 30 watts, a total of 180 watts. This power is more than sufficient to operate a plurality of the most common models fan at an output can, without the boundaries of the fan control can be achieved. Power is supplied via 4-pin Molex on AC power.
The display is clear and most of the functions are self-explanatory. Each channel has its own display for speed, type, voltage and temperature. In addition, the voltage of each channel using the knob can be regulated with extreme precision from 0 to 12 V in 0.1 V steps. A built-in alarm function alerts the user also before overheated components or failing fans. Two supplied 3-pin cable allow to boot the joining of two Thermaltake LUMI LED strips with the fan control.
- Dimensions: 150 x 43 x 90 mm (W x H x D)
- Slot: 1x 5.25
- Weight: 345g
- Material: Plastic
- Color: Black
- 6x 3-Pin (PWM fans also connected, but regulated only voltage)
- Endurance: each 30 W
- Temperature sensors: 6
- Temperature range: 0 - 90 °
- Power: 4-pin Molex