Streacom ST-NANO90 HTPC power supply - 90 watts [ST-NANO90]

It is a set that consists of an external AC-DC adapter (as you know about laptops) and an internal DC DC converter board that is plugged directly to the 24-pin connector of the mainboard. Both components are connected by means of a hollow connector and corresponding socket.

The socket expires from the internal transducer board over a 40 cm long cable, which can be fixed by knurled nut on the back of the housing, where the cable is plugged in from the external adapter. The ST-NANO90 HTPC power supply is ideal for Silent systems based on Streaacom's innovative passive enclosures, but can also be used in other HTPC configurations as long as the maximum total performance of 90 watts is not exceeded.

Technical details:
- Type: Internal DC-DC converter board and external AC-DC adapters (power supply)
- Compatibility: (Streaacom) passive housing
- Dimensions (internal board): 54 x 24 x 18 mm (W x H x D)
- Dimensions (external adapters): 140 x 58 x 32 mm (W x H x D)
- Input voltage (board): 12 V DC (7.5 A)
- Input voltage (adapter): 90 - 250 V AC
- Max. Total output: 90 W
- + 3.3V: 5.0 A
- + 5V: 5.0 A
- + 12V: 5.0 A
- -12V: 0.1 A
- + 5VSB: 1.0 A
- Connections (board):
- 1x 24-pin ATX
- 1x 4-pin ATX
- 2x SATA
- 1x 4-pole Molex
- 1x Input Hohl plug jack (fixable by nut)
Connections (adapter):
- 1x input cold device cable (C6 plug)
- 1x output hollow plug (to the board)
- Protective circuits: Overload protection (OPP), short circuit protection (SCP)