Singularity Computers Specter 3.0 Elite Kit - Distroplate - silver [SC-S3-ELITEF-SL]

 A total of two of the Elite kits can be installed in the front and in the lid. These replace the classic outer panels made of aluminum and give the extravagant housing not only a glass look but also additional cooling reserves. The available space inside the housing is completely retained. The built-in spacers offer enough space to supply the radiators with fresh air.

When mounting in the front of the housing, the connections for the WaKü-Loop are on top, but when it is mounted in the cover, the ports are aligned on the back. The two connections are made in G1 / 4 inches (BSPP standard) and can be used as an in and outlet. The function (In / Out) can be freely selected, so that the best possible orientation for the custom loop is given. Since the Specter 3.0 Elite widens the housing, but does not reduce the interior space, two 360 mm large and 60 mm high radiators can still be installed.

Note: The Specter 3.0 Elite is only compatible with the Specter 3.0 from Singularity Computers. This variant is held in silver and therefore matches the silver version of the Specter 3.0. Installed LED strips may be a maximum of 2 mm high and 5 mm wide and a maximum length of 435 mm.

Technical details:
- Dimensions: 510 x 35 x 210 mm (W x H x D)
- Weight: 1.5kg
- silver
- Material: anodized aluminum (6061), acrylic, stainless steel, silicone
- Ports: 2x G1 / 4 inch (BSPP standard) inlet and outlet
- Compatibility:
- Singularity Computers Specter 3.0 (silver)
- Ports: 2x G1 / 4 inch (BSPP standard) in and outlet