Silverstone SST-FAR1W-PRO FARA R1 Pro ATX case, ARGB - white [SST-FAR1W-PRO]

With compatibility with boards up to ATX format and graphics cards up to 322 mm, the midi tower can also accommodate high-performance components. The mesh front and the three pre-installed 120 mm ARGB fans including RGB control ensure generous airflow and cooling.

The features of the Silverstone Fara R1 Pro at a glance:
Midi-Tower for ATX, Micro-ATX and Mini-ITX
Tempered glass side panel
Front with breathable mesh design
Three pre-installed 120 mm ARGB fans, RGB control included
Space for a total of up to five data carriers in 2.5 or 3.5 inch format
Graphics cards up to 322 mm in length, CPU coolers up to 165 mm

The Silverstone Fara R1 Pro in detail
The Fara R1 Pro from Silverstone convinces with a chic and tidy look that offers a view of the essentials of a chic computer: the hardware. The left side part of the Silverstone Fara R1 Pro is made entirely of tempered glass and reveals every detail of the interior. Inside there is space for 322 mm long graphics cards and 165 mm CPU coolers.

The front has a large mesh, through which two pre-installed 120 mm ARGB fans can supply the interior with fresh air. Another pre-installed 120 mm ARGB fan on the back transports the warm air out of the case. The lighting of the fans can be configured via the integrated ARGB control or via the mainboard. At the top there is still space for two additional 120 mm or 140 mm fans. Alternatively, a radiator up to 280 mm in size can be attached to the front, while there is space on the cover for a 240 mm heat exchanger.

There is space for up to four 2.5-inch and one 3.5-inch data carriers in the hard drive cage and on the mainboard tray. There are also enough I / O ports: In addition to two USB 3.0 Type A slots, there is also a USB 2.0 port and a headphone and microphone connection.

Technical details:
Dimensions: 207 x 446 x 390 mm (W x H x D)
Material: plastic, steel, tempered glass
Weight: 5.37 kg
Volume: 36.01 liters
Color white
Form factor: ATX, Micro-ATX, Mini-ITX
Total fans possible:
Front: 3x 120 / 2x 140 mm
Back: 1x 120 mm
Lid: 2x 120/140 mm
Of which pre-installed:
2x 120 mm (front)
1x 120 mm (rear)
Radiator mountings:
Front: 1x max. 280 mm
Lid: 1x max. 240 mm
Back: 1x max. 120 mm
Drive bays:
1x 3.5 inch (internal)
4x 2.5 inches (internal)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 3.0 type A
1x USB 2.0 type A
2x audio (1x in, 1x out)
Maximum graphics card length: length 322 mm (without front fans), width 170 mm
Maximum CPU cooler height: 165 mm
Maximum power supply length: 160 mm (with drive cage)