In addition, the big tower with 470 mm offers enough space for overlong graphics cards. In addition, there is a solid equipment with a pre-installed 140-mm fan on the back and two other 120-mm fans on the front. Above all, the cotton insulating mats on both sides as well as on the lid and front ensure a whisper-quiet system.
The Raijintek Zofos Evo Silent Big Tower at a glance:
High-quality black Big Tower made of 1 mm steel
Cotton insulating mats on both sides, lid and front
Space for server motherboards up to EE-ATX form factor
Graphics cards up to 470 mm in length (with partial waiver of drive cages)
Two slots for 5.25 "drives
Accommodates 13x 2.5-inch or 10x 3.5-inch and 3x 2.5-inch drives
Space for up to 420mm radiators in the front, up to 360mm on the lid
Tinted tempered glass side panel on the Zofos Evo Silent
When designing the Big-Tower Zofos Evo Silent, Raijintek made the most of it. Because the designers have not only focused on the spacious interior, but also made the exterior of the case appealing. The bevelled front made of high-quality plastic with the look of brushed aluminum immediately stands out, especially when the RGB LED strips behind it shine. The RGB lighting of the LED strips can be connected to an RGB controller in the housing, which provides a total of eight ports. Which in turn is either connected to the motherboard and controlled by software or via the also included remote control.
The front panel is easy to remove thanks to magnetic brackets. Behind it hides a honeycomb mesh grille with dust filter. In addition, the two external 5.25 "inch bays for optical drives or controllers emerge.The top is interrupted by a honeycomb mesh grid, also to ensure optimum airflow in the housing, which can be lit by a total of seven possible fans Raijintek has already attached two 120mm fans to the front of the case.
Lots of space in the Zofos Evo Silent for water cooling and fans
A total of up to three 120 mm or 140 mm fans can be installed behind the front. There is also space for a radiator up to 420 mm in size, which may be up to 85 mm deep with a fan. Before that, three drive cages are installed, each of which can hold two 3.5-inch or 2.5-inch drives. The cages are attached with thumbscrews and can be easily removed if necessary to make room for up to 47 inches long graphics card, which may otherwise be 34 inches long. The cages are attached with thumbscrews and can be easily removed if necessary. The installation of the drives there is done without tools. There is still space for two 140 mm or three 120 mm fans on the lid or, alternatively, a radiator up to 360 mm in size. A mounting bracket is included with the Zofos Evo Silent. Another 360 mm radiator with a depth of 85 mm can be placed at the side of the front part of the right cover. There is also a mesh grid. However, the radiator installed there may collide with radiators or fans located on the lid or front. A CPU cooler installed in the Zofos Evo Silent may be 190 mm high.
The cover for the power supply also has magnetic brackets. Behind it has an ATX or EPS power supply with up to 350 mm in length space, if a drive cage is omitted. Because there are two more drive cages, which increases the possible number of 3.5-inch drives to a total of ten. They can all be replaced by 2.5-inch drives. Three more 2.5-inch drives can be attached to the back of the mainboard tray, but in this version of the case there is a space occupied by the RGB controller. Overall, the Zofos Evo Silent has space for 13 SSD drives.
Vertical installation options for graphics cards
In addition to ten horizontal slots, there is still the possibility of vertical installation of a graphics card on the back. This requires an optional riser cable that is not included with the case. Dust filters are available for the lid, the front and under the power supply. Of course, with such a well-equipped case, the I / O panel should not fall behind. There are also two older USB 3.0 plugs and the usual sockets for audio-in and audio-out. Of course, the spacious Zofos Evo Silent offers enough space for perfect cable management.
Technical details:
Dimensions: 224 x 617 x 598 mm (W x H x D)
Weight: about 15.3 kg
Material: steel, plastic
Color: Black
Form factor: EE-ATX, E-ATX, ATX, Micro-ATX, Mini-ITX
Total possible fan:
3x 120mm / 140mm (front)
3x 120 mm or 2x 140 mm (cover)
1x 120 mm or 1x 140 mm (back)
Preinstalled:
2x 120 mm (front side)
1x 140 mm (back)
Radiator Mountings:
1x 240/280/360/420 mm, 85 depth (front side)
1x 240/280/360 mm, 85 depth (side)
1x 240/280/360 mm, 85 depth (cover)
Filter: front, lid, bottom
Drive Bays:
2x 5.25 inches (external)
10x 3.5 inches / 2.5 inches (internal)
3x 2.5 inches (internal)
Power supply: 1x standard ATX / EPS
Expansion slots: 10 + 2 (tool-free)
I / O panel:
2x USB 3.0
1x each audio in / out
Maximum graphics card length: 470 mm (partially waiving drive cages)
Maximum CPU cooler height: 190 mm
Maximum network part length: 350 mm (with partial waiver of drive cages)