Phanteks PH F120MP 120mm fans - black / black [PH-F120MP_BBK]

With the fans of MP, SP and XP series Phanteks would like to underline that reputation once more and truly great sends fans into the race, the SP and XP versions (with and without PWM connector) on a particularly high Airflow are designed, while in the MP-fans (with PWM connector) the maximum static pressure is in the foreground.

The seven fan blades on the rotor of the PH-F120MP been optimized to generate a maximum static pressure: in this 120-mm specimen with 4-pin PWM connector which gives at full speed of 1,800 rev / min a "static air pressure "of high 1.72 mm H2O plus an airflow of 90.1 m³ / h and predestined the PH-F120MP for use on watercooling radiators, even on such a high fin density.

In this case the fan operates at a maximum of 25 dB (A), but can operate more quietly and at minimum revolutions of 500 revolutions / min. For the connection of high static pressure at the same time a relatively low noise are particularly fan blades with the revised "Maelstrom Vortex Booster II" design, short MVB II, responsible. Your incorporated waveform is an important key to success.

All the advantages of an innovative fan blade designs fizzle but when driving and bearing failure and chirps of the fan, buzzing and / or rattles. So something does not exist at Phanteks course, the fans come with the proven UFB-Bearing ("Updraft Floating Balance") which quiet operation and an extremely long service life of 150,000 hours ensures.

No wonder that Phanteks once again does not hesitate to give very generous five years warranty on the PH-F120MP fan. Thanks to the built-in fan frame rubber sections at the 120-mm-holes is counteracted when used as a radiator or case fans of the vibration transmission - even at full 1800 U / min.

Visually the silent but potent fans an enrichment for every heat exchanger and each housing are in black frames with extra vulgar shape and curved ridges sits the also black rotor with seven blades. The 4-pin PWM connector cable is black sleeved, are included also four standard fan screws.

Technical details:
    Dimensions: 120 x 120 x 25 mm (W x H x D)
    Holes: 120 x 120 mm
    Color: Black (Frame / rotor)
    Volume: max. 25 dB (A)
    Speed: 500 - 1,800 results (+/- 250) U / min
    Air flow: 90.1 m³ / h
    Static pressure: 1.72 mm H2O
    Voltage: 12 V
    Power Consumption: 2.4 W / 0.2 A
    Life expectancy: 150,000 hours
    Manufacturer Warranty: 5 years
    Connection:
    4-pin PWM
Delivery:
    PH F120MP fan
    4x Fan screws