Details
The special touch of Enthoo Primo SE also emerges from the combination of sandblasted black aluminum with a vertical green stripes and light green interior. Its asymmetrical "shifted design" not only looks good, but also brings the interior a few inches more space for an extraordinary interior design.
First, the continuous drive panel falls from the five tools that can be used 5.25-inch drives and two HDD cages (for three 3.5-inch or 2.5-inch disk) into the eye. It increases the overall stability, which reduces vibration and provides a tidy image as seen through the smaller of the two windows, which is not disturbed by hard drive cable.
Instead, one can see a high-quality Phanteks badge. The up to six drives are therefore insert from right, with the two cages are flexible - so you can be about one or even both waive all or they either use a little further forward or back. In the ODD bay there are two Doubelstack SSD mounts, each with two flash drives can be fitted and easy to fit in there ("Drop-n-Lock").
Moreover, it is clear that on this page, below the Mainboardtrays for E-ATX / ATX / Micro ATX / Mini-ITX motherboards, the main power supply is housed own chamber prevents the heat output from the PSU to other components and vice versa from the side of the upright lying power supply fresh air moves through a grid of holes. Large, rubberized openings, the connection to the main chamber.
The well 3 cm space on the rear tray side make cable routing for pleasure and clips and Velcro straps tame even the most stubborn strands. Where they pass through the vertical openings in the main chamber, a modesty panel prevents too intrusive presence. However, the aperture has a second function, namely, in case of need it carries one of two cooling water reservoir, while the other depends not only on the eight PCI slots.
In order for a field of application is addressed, for no other big tower on the market is as well prepared as the Enthoo Primo! Not only is a pump mount for a variety of models integrated Phanteks has also thought of bombastic and maximum flexible installation options for radiators. If the full-tower already with its options for up to 16 (!) 120 mm and a maximum of eleven 140-mm fan impressive, as he has in the Radi-Mountings any competitor in its place.
In the front and to the right instead of the HDD cages go up to 240 mm large heat exchangers in front of the rear fan slot is also a small 140s feel comfortable and in lid and bottom fit even 480s Quad Monster, with above a dual radiator with 280 -mm-moderation is sheetingable. Not all configurations are also possible - although a majority - and sometimes HDDs or fans must give way. About the exact options are particularly the first video in the technical details digestion.
The Aircooling also comes far too short, there are even already five 140-mm fan from Phanteks' also new Series PH-F140SP pre-assembled. The fans are designed to operate quietly and yet very powerful. It connects directly to the supplied internal fan board, the out-of-the-box, and up to eight per additional Y-adapter (z. B. ZUAD-004 or ZUAD-134) up to eleven 3-pin fan in PWM can run mode, they produce the factory already an extremely effective air flow, but thanks to the removable filter at key points in barely wearing dust.
The two pre-installed front fan also has a green LED light, which shimmers discreetly through the mesh lines around the rectangular lower front cover. It is, however, together with the LED strip on the top right button also suppressible. Each pair of USB 3.0 and 2.0 ports and audio jacks are easy to reach on the top and contribute to the aesthetic, functional top-Phanteks Enthoo Primo SE is a true dream body!
Technical details:
Dimensions: 250 x 650 x 600 mm (W x H x D)
Material: Steel (Body), sandblasted aluminum (front cover)
Weight: 17.9 kg
Color: Black, Green
Lighting Green (deactivated)
Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX, SSI EEB
Fan total possible:
2x 140/120 mm (front)
2x 140/120 mm (rear)
2x 120 mm (HDD cage)
2x 140/120 mm (right side panel)
3x 140 / 4x 120 mm (lid)
2x 140 / 4x 120 mm (bottom)
Of this pre-installed:
2x 140 mm (front;. PH-F140SP, green LEDs, max 1200 r / min, 19 dB (A))
1x 140 mm (rear;. PH-F140SP, max 1200 r / min, 19 dB (A))
1x 140 mm (lid;. PH-F140SP, max 1.200 U / min, 19 dB (A))
1x 140 mm (bottom;. PH-F140SP, max 1.200 U / min, 19 dB (A))
Radiator Mountings (partial waiver of HDD and / or fan-Slots)
1x max. 240 mm (front)
1x max. 140 mm (rear)
1x max. 240 mm (right side panel)
1x max. 480/280 mm (lid)
1x max. 480/280 mm (bottom)
Filters: front, ground, power supply (removable)
Drive Bays:
5x 5.25 inch (external, tools)
6x 3.5 inch (internal, 2 HDD cages, tools)
12x 2.5 inch (internal, 6x instead of 3.5 inches, 4x per double stack holder with "Drop-n-Lock" + 2x optionally via the optionally available SSD bracket GEPH-010)
Power supply: 2x Standard ATX (optional)
Expansion Slots: 8
I / O Panel:
2x USB 3.0 (internal links)
2x USB 2.0
1x per Audio In / Out
1x LED Switch
Maximum video card length: 257 mm (without any waiver)
Maximum video card length: 390 mm (with HDD cages in front position)
Maximum video card length: 515 mm (without HDD cages)
Maximum CPU cooler height: 207 mm