PHANTEKS Enthoo Pro M Special Edition, Tempered Glass - black / white [PH-ES515PTG_SWT]

The variant now has a stylish side panel made of hardened glass, which allows an unobstructed view into the interior of the case , Besides the dust filters for the front, cover and power supply cover, the housing has two preinstalled 140 mm fans, which are equipped with two Phanteks Halos RGB fan frames and can be supplemented with additional fans or replaced by radiators (up to 360 mm). In addition, mainboards can be installed up to E-ATX form factor and a maximum of eight 3.5-inch and five 2.5-inch disks, with two 2.5-inch drives instead of two 3.5-inch drives And optional brackets are required for full driveability.

The most important features of the Phanteks Enthoo Enthoo Pro M Special Edition Midi-Towers:

Noble design by tinted hard-glass side panel & high-quality materials
Noble interior in bright white
Fits mainboards up to E-ATX form factor (26.4 cm wide)
Three dust filters & two 140mm fans already included
Two Phanteks Halos RGB fan frames for impressive lighting
Side I / O panel with RGB control, two USB 3.0 ports and HD audio connectors
Space for two 3.5-inch & three 2.5-inch disks (2x 2.5-inch instead of 3.5-inch, expandable)
Graphics cards up to 42 cm, CPU coolers up to 19.4 cm & power supplies up to 31.8 cm
Timelessly elegant design with large glass side window

The removable front panel offers a large black mesh as an air intake and is exactly the same as the lid thanks to the look of black plastic in the style of brushed aluminum very high-quality designed. At the front, a 5.25-inch plug-in is hidden behind a bezel, the I / O ports, two USB 3.0 ports, two audio ports and a reset button are located on the front. Also the RGB control is not missing here. The left side wall, which consists of a huge tinted hard-glass pane, gives an impressive insight into the white base frame in the housing as well as the installed hardware.

The top part continues the look seamlessly. Front only a power button, behind it lie fan slots hidden behind mesh. In contrast to many other cases, Phanteks has donated the Enthoo Pro M Special Edition not only in the front and bottom, but also a dust filter. The view through the window, in addition to many rubberized cable ducts, also has its own, enclosed chamber for the ATX power supply, which attracts its fresh air from below and does not radiate its warmth to the other parts in the tower. Behind the front panel, up to two 140 or three 120 mm fans can be attached, or a corresponding heat exchanger. Only when a 360 mm radiator is installed, the 5.25 inch cage must be removed. Pre-assembled are already two 140 fans in the front, which are additionally equipped with Phanteks Halos RGB fan frame.

In this case, the fan assembly can be mounted in the cover by a further two 140 or 120 mm fans. Without a 5.25-inch cage, three 120-mm fans would also be possible. As an alternative, a 280 or 360 mm heat exchanger can be installed in each case, which can be installed in the cover by means of a laterally extractable bracket with the 5.25 inch cage removed. As a result, when a radis is installed, collisions with plugged-in RAM modules can be prevented - which also contributes to the fact that the fans and, if necessary, the radiator are not mounted centrally, but offset to the left, providing the largest possible space between mainboard and fan / radiator. On the rear, a radiator of size 120 or 140 mm can also be installed in analogy to the fan equipment - overall, a very strong ventilation and also a great deal of space for water cooling components.

The white metal cover of the power supply chamber, which makes the interior look very tidy, also offers two mounting shelves behind the front for 2.5 or 3.5 inch data carriers. At this point, however, the optional vibration-inhibiting pump holder can also be mounted. If this is installed in conjunction with a larger reservoir or a radiator is used behind the front, a section can be removed from the horizontal separation, which, however, also provides mounting options for pumps and expansion tanks. So there are many different ways to store drives and water cooling. Also right behind the front, there is the option of using up to five additional 3.5 or 2.5-inch drives with optional trays - the trays are screwed to the mainboard support here.

On the back of the mainboard, handsome 35 mm space invite to the neat cable laying. There is also a 2.5 inch bracket with a drop-n-lock mechanism for a 2.5-inch drive, one of which can be mounted directly next to the front of the power supply cover , An optional PWM fan hub (LULS-239) allows a maximum of eight 3-pin fans to be controlled via a 4-pin PWM board connection.

Note: Only a 360 mm radiator can be installed, either at the top of the lid or at the front in the front.

Technical details:

Dimensions: 235 x 480 x 500 mm (W x H x D)
Weight: approx. 7.4 kg
Material: steel (body), hard glass (side window), plastic with brushed aluminum look (front)
Color: Black, White
Form Factor: E-ATX (up to 264 mm width), ATX, Micro-ATX, Mini-ITX
Total fan possible:
2x 140 / 3x 120 mm (front)
2x 140 / 3x 120 mm (cover, with 5.25 inch cage only 2x 140/120 mm)
1x 140/120 mm (rear side)
Pre-installed:
2x 140 mm (front panel, PH-F140SP, 1200 RPM, 19 dB (A), with PH-FF140RGBP)
Radiator mountings (partial waiver of HDD and / or fan slots):
1x max. 280/360 mm (front, 360 mm only without 5.25 inch cage)
1x max. 140/120 mm (rear side)
1x max. 280/360 mm (cover, 360 mm only without 5.25 inch cage)
Filter: Front, cover, power supply (removable)
Drive Bays:
1x 5.25 inch (external, removable bay)
2x 3.5 inch (internal, decoupled, + 6x optional with additionally available HDD bracket GEPH-032)
3x 2.5 "(2x2.5 inch internal, SSD bracket behind the motherboard tray with" drop-n-lock "+ 1x or 2x optional via additional SSD bracket GEPH-009 or GEPH -010)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 3.0
1x each audio in / out
RGB control
Maximum graphics card length: 420/300 mm (without / with HDD brackets)
Maximum CPU cooler height: 194 mm
Maximum power supply length: 318 mm
Warranty: 5 years