Lian Li TU150WA Mini Tower, tempered glass - silver [TU150WA]

At the same time, Lian Li did not neglect the design. The Lian Li TU150 is extremely easy to carry with its extremely compact dimensions of 20.3 x 37.5 x 31.2 cm and therefore has a practical fold-out handle on the top. Particularly chic are the side and the front and top covers made of aluminum and of course the side part of tinted tempered glass.

The Lian Li TU150 Mini-ITX Case Overview:
- Brushed aluminum body with steel frame
- Side part made of tinted tempered glass
- Suitable for space-saving SFX or SFX-L power supplies
- Particularly compact dimensions and low weight
- Carrying handle integrated in the housing cover
- Accommodates up to two 2.5-inch SSDs or one 3.5-inch HDD and one 2.5-inch SSD
- Room for 2.5-slot graphics cards up to 320 mm in length, CPU cooler up to 165 mm
- I / O panel with 1x USB 3.1 Type C, 2x USB 3.0 and 1x per Audio In / Out

Lian Li TU150 Mini-ITX: High mobility thanks to compact design
Lian Li is using the SFX instead of the ATX form factor power supplies on the TU150 Mini-ITX package to provide more space for powerful gaming hardware. The power supply is placed at the top behind the front panel, an internal extension cable leads to the rear slot for the power plug. The slots for the cables protrude to the left and are covered by a metal cover on the Temperglasscheibe. The cable management has split Lian Li without further ado. Under the removable lid made of aluminum is just as space behind the back wall of the motherboard tray. The tray can be used to mount motherboards in Mini-ITX or Mini-DTX format. A total of three PCI slot covers allow the installation of high-end graphics cards with a maximum length of 32 centimeters. You may have a height of 2.5 slots. If fans are installed on the floor, the height is reduced to two slots.

The horizontal Airflow concept with the front and rear 120 mm fan slots cools all installed hardware components sufficiently. Brushed aluminum air intakes are integrated on the brushed aluminum front cover, and a removable dust filter is mounted in front of the fan slot. In addition, two fans can be attached to the bottom, which can lead the waste heat of the graphics card to the outside. Despite the extremely compact design, CPU coolers with a maximum height of 165 millimeters can be accommodated in the Lian Li PC-TU150. If you prefer a water cooling system, you can attach a 120 mm radiator to the rear instead of the fan.

Two 2.5-inch data storage devices can be installed in the Lian Li PC-TU150, between the mainboard and the front and on the cover above the mainboard. Instead, a 3.5-inch drive can also be attached there; the rubber decouplers required for this are included with the case. The top front I / O panel has one USB 3.1 Type C and two 3.0 Type A ports in addition to the mandatory audio and power / reset buttons.

Technical details:
- Dimensions: 203 x 312 x 375 mm (W x H x D)
- Material: aluminum, steel, tempered glass
- silver
- Weight: approx. 4.5 kg
- Form factor: Mini-ITX, Mini-DTX
Fan possible:
 -1x 120 mm (front)
- 1x 120 mm (back)
- 2x 120 mm (floor)
- Preinstalled: none
- Radiator-Mountings: 1x 120 mm (back)
- Dust filter: front
drives:
- 1x 2.5 inches (internal, mainboard tray)
- 1x 3.5 / 2.5 inches (internal, cover)
- Expansion slots: 3 (graphics cards up to a maximum of 2.5 slots, 2 slots with fans installed on the floor
- Power supply (optional): Standard SFX, SFX-L
I / O panel:
- 1x USB 3.1 type C
- 2x USB 3.0 Type A
- 1x each audio in / out
- Maximum graphics card length: 320 mm
- Maximum CPU cooler height: 165 mm