Lian Li PC-B70B Black Super Full Tower Case [CSLIANPCB70B]

Key Features:
• Huge internal space fits E-ATX motherboard, and graphics card, which can up to 345mm long, and there are room for 10 hard drivers, there are space for dual power supply units. There are 2 x 12cm and 2 x 14cm cooling fans to cool the system down, and a lot of internal space for liquid cooling system. It is an ideal for gamer and pro users!
• All new PCI lock design, switch the lock off , install the extra card then switch it on. Easily and quickly.
• The new switch design for CD-ROM cage, user can easily remove CD-ROM without a screws. and Lian-li designer use plastics to absorb the vibration to reduce the noise, make sure steadiness of it.
• PC-B70 has equipped two 140mm cooling fans in the fornt of the chassis, there are two fans intake the cool air into the case, The Fan not only cool the HDD down, it also help the motherboard's North & South bridge chipset, and the graphics card.
• There are two silent 14cm ball-bearing intake blue LED fan (1200RPM) which brings cold air into the chassis
• PC-B70 features Lian Li patented Anti-virbation HDD cage, which allow user to fit seven of 3.5" HDD. It is easy to use, no tool required, simply using the special thrumb screw to secure the anti-vibration rubber ring to the HDD, and slide the HDD into the cage.
• The Front panel is mounted with a specially made plastic kit, this prevents the metal parts touching each other, and reduces the noise by reducing the vibration.
• Lian Li designers consider every detail. The PC-B70 is equipped with anti-vibration clips and grommets on the chassis, to absorb the noises created by vibrating and spinning parts. The EMI spring on the top cover absorbs the vibrations, without interfering with the side panel.
• PC-B70 is using "Thermal Tunnel" solution, the two 140mm fans in the front input cold air into the system, the two 120mm fans and the PSU's fan draw the hot air out as a heat circulation.• PC-B70 Features a three-speed fan controller, user can adjust the fan speeds to get the best balance between silent and increased cooling. Factory setting are default at Mid Speed, but user can adjust the fan speed as needed.
• There are two 140mm intake blue LED fan on PC-B70, The fan can output high air flow volume with lower RPM to push the cold air through the HDD rack. It connected to a three-speed controller, factory setting at middle(890RPM), user can adjust it to suit.
• There is a 120mm exhaust fan behind HDD cage to draw the hot air out, and improve the air flow inside the chassis.

Specifications:
• Model : PC-B70
• Case Type : Full Tower Chassis
• Dimensions : 220mm x 595mm x 590mm(W x H x D)
• Front bezel Material : Aluminum
• Side Panel : Aluminum
• Body Material : Aluminum
• Net Weight : 14kg
• 5.25" drive bay (External) : 5 (one for 3.5 inch convertor)
• 3.5" drive bay (External) : 1
• 3.5" drive bay (Internal) : 10
• Expansion Slot : 7
• Motherboard : E-ATX, ATX, M-ATX
• System Fan (Front) : 2 x 140mm blue LED fan (1200RPM)
• System Fan (Rear) : 2 x 120mm Ball-Bearing Fan (1500RPM)
• I/O Ports : USB2.0 x 4, IEEE1394 x 1, ESATA x 1, HD+AC97 Audio