Lian Li O11 Dynamic XL Midi-Tower with RGB Distribution Panel - Black [O11DXL-X+LLO11-SDB XL]

The dimensions of the case have been adjusted so that even the huge SSI EEB motherboard ASUS ROG Dominus Extreme with Intel's C621 chipset and the socket 3647 for Xeon processors can easily fit into the case with the help of an optional extension rail. What remains is the wide two-chamber design of the Midi Tower, which offers plenty of room for more sophisticated gaming components, along with excellent cable management, and allows for the installation of extensive air or custom water cooling.

Features of the Lian Li O11 Dynamic XL (ROG Certified) Midi-Towers:
- Noble combination of aluminum, tempered glass and steel
- Space for motherboards with E-ATX, ATX, Micro-ATX or Mini-ITX form factor
- 6x 2.5 "SSDs & 4x 3.5" HDDs including HDD hot swap feature
- Front panel with 4x USB 3.0 Type-A & 1x USB 3.1 Type-C
- Graphics cards up to 44.6 cm in length
- Three built-in slots for 360 mm radiators
- Up to ten 120 mm fans possible

E-ATX case with classy design: brushed aluminum meets tempered glass
The modular Lian Li O11Dynamic XL (ROG Certified) Midi Tower skilfully combines steel with a tinted tempered glass side panel. Lian Li goes one step further and equips the right side panel and lid with 1 mm thick aluminum. The front side is also made of tempered glass and, together with the side part, allows an almost unobstructed view of the interior of the case.

The right part of the front houses the I / O panel with a USB 3.1 Type C port, two USB 3.0 ports and the two mandatory audio ports. Two more USB 3.0 ports are located on the right foot of the front panel. Between the I / O panel and tempered glass is a subtle RGB LED strip, which extends from top to bottom and whose lighting can be controlled via two switches on the panel. Optionally, the RGB LED strip can also be connected to a conventional 5VDG slot of a correspondingly equipped mainboard.

Ample space for gaming hardware
For the installation of AiO or custom water cooling, the case offers the possibility to accommodate up to three 360 mm radiators simultaneously: one in the lid, one on the bottom and one next to the mainboard. In the right side panel are also ventilation slots to dissipate the heat accordingly. If you want to install three 360 mm radiators simultaneously, you should use narrow specimens in the lid and a slim radiator next to the mainboard. In general, the installation of three triple radiators is possible, but this requires a bit of attention when choosing components for custom water cooling. The lid also offers the option of installing a 280 mm radiator.

Excellent airflow for fantastic cooling
Of course, the radiator slots can also be equipped with fans. There may be up to three 120s on the side behind the front, on the lid and on the floor. Instead of three 120s, there are two 140s on the lid and bottom. For a clean cable management several partially rubberized cable glands are present, which are placed, inter alia, on the middle plate next to the motherboard. The right chamber houses the hardware, which emits little heat and does not need to be cooled, such as the power supply and HDD drives.

Included Distribution Panel:
- This Waterway board is only compatible with the Lian Li O11DXL-X Dynamic XL Case installed next to the Motherboard Tray, and may not fit other cases
- Can be used as a Reservoir with the Pump Inlet feed or stand alone (No Pump supplied)
- LRC 2.0 RGB 5v Lighting, compatible with Aura Sync, MSI Mystic, Gigabyte RGB, Asrock LED and Barrow LRC Controllers
- High production quality and strict QC ensure 100% no cracks or leaks
- G1/4 ports for ultimate flexibility

Technical Data:
Material: Matte Acrylic + Clear Acrylic
Lighting: LRC 2.0 RGB 5v Lighting compatibility
Colour: Frosted Acrylic
Thread Size: G1/4

Note: When installing Barrow Waterway plates, insert all screws first 50% of the way, until all are installed and then tighten them up fully at the end.

Case Technical details:
- Dimensions: 285 x 513 x 471 mm (W x H x D)
- Material: steel (interior), aluminum (cover, side panel, front, feet), tempered glass (front, side panel)
- Weight: about 10.1 kg
- Color: Black
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX (EEB with optional extension rail)
Total possible fan:
- 3x 120 mm / 2x 140 mm (bottom)
- 3x 120 mm / 2x 140 mm (cover)
- 3x 120 mm (side panel, front)
- 1x 120 mm (back)
Radiator mountings (waiving fan slots):
- 1x max. 360 mm / 280 mm (cover)
- 1x max. 360 mm / 280 mm (floor)
- 1x max. 360 mm (side part, waiving SDD brackets)
- Filter: bottom, lid, side panel
Drive Bays:
- 4x 2.5 / 3.5-inch drives (internal)
- 6x 2.5-inch drives (internal)
- Power supply: 1x ATX (optional)
- Expansion Slots: 8
I / O panel:
- 1x USB 3.1 Type-C (internal connection)
- 4x USB 3.0 Type-A (internal connection)
- 1x each audio in / out
- On / off switch
- Maximum graphics card length: 446 mm
- Maximum CPU cooler height: 167 mm
- Maximum network part length: 210 mm

Included:
1x Lian Li O11Dynamic XL (ROG Certified) Midi-Tower - Black
1x Barrow Waterway LRC 2.0 RGB Distribution Panel (Tray) for Lian Li O11DXL-X Dynamic XL

Note: Distribution panel is supplied without pump, you can either use the panel as a reservoir and pipe an external pump to it as normal or you can install a Barrow Waterway panel pump directly to the board (Similar to DDC) for a neater look.

Integrated pump options:
- BarrowCH 17W PWM 960LPH Intelligent Pump For Waterway Panel With OLED Display - Black

- Barrow 17W PWM 960 LPH Pump for Waterway Panel - Clear (Comming soon)