Lian Li O11 Dynamic PCMR Special Edition Midi-Tower - space gray [O11D-PCMR2ndb]

Everything revolves around carefully planning the next gaming PC, finding the perfect setup and the latest trends.

Lian Li and PCMR have teamed up to express this passion with the O11 Dynamic PCMR Special Edition. What followed is legend: the special edition, limited to 2000 pieces worldwide, was sold out in a very short time and left many broken hearts. The combination of matt metal surfaces in space gray, chrome-plated aluminum and mirrored tempered glass, which makes the hearts of enthusiasts beat faster, is experiencing a renaissance with the second edition, the PCMR Special Edition 2nd Batch Midi-Tower. In contrast to its predecessor, the PCMR logo was etched into the left side part. The serial numbers start at 2001 and end at 4000.

The features of the Lian Li O11 Dynamic PCMR Special Edition 2nd Batch Midi-Tower at a glance:
- Noble combination of chrome-plated aluminum, mirrored tempered glass and steel
- Special edition limited to 2000 pieces worldwide
- Space for mainboards with E-ATX, ATX, Micro-ATX or Mini-ITX form factor
- Clever two-chamber design
- 4x 2.5-inch SSDs & 2x 3.5-inch HDDs
- Front panel with 2x USB 3.0 Type-A & 1x USB 3.1 Type-C
- Graphics cards up to 42 cm in length
- Three installation slots for 360 mm radiators
- Up to nine 120 mm fans possible
- Space for two power supplies
- Special edition with mirrored tempered glass and chrome-plated aluminum

With the Lian Li O11 Dynamic PCMR Special Edition 2nd Batch Midi-Tower, 8 mm steel with a matt coating in space gray is skillfully combined with a side panel made of mirrored tempered glass. Lian Li and PCMR go one step further and also equip the front of the case with mirrored tempered glass. In the 2nd batch, the glass side panel is etched in the form of the PCMR logo. The numbers on the badge start with 2001 and end with 4000.

The decorative strip on the right-hand front is made of elaborately chrome-plated aluminum that has been polished to a high gloss. It houses the front panel with a USB 3.1 Type-C port, two USB 3.0 ports and the two mandatory audio connections. The Lian Li O11 Dynamic PCMR Special Edition 2nd Batch Midi-Tower can accommodate a maximum of one E-ATX mainboard, a graphics card up to 420 mm long and a CPU cooler up to 155 mm high in the left chamber.

Predestined for custom and complete water cooling
The elegant Lian Li O11 Dynamic PCMR Special Edition 2nd Batch is not only definitely a real eye-catcher and can easily accommodate gaming hardware, but is also particularly suitable for PC enthusiasts who want to cool their hardware with a custom loop.

For the installation of an AiO or custom water cooling, the case offers the option of accommodating 360 mm radiators in three places: on the lid, on the bottom and next to the mainboard. There are ventilation slots in the right side part to dissipate the heat accordingly.

If you want to install three 360 mm radiators at the same time, you should use narrow copies in the top and bottom and a slim radiator next to the mainboard. In general, the installation of three triple radiators is possible, but this requires some attention when choosing components for the custom water cooling. There is also the option of installing a 280 mm radiator in the lid.
Excellent airflow
Alternatively, the radiator spaces can also be used with fans. On the side behind the front and the bottom there can be up to three 120s, on the lid there is space for two 140s instead of three 120s. For a clean cable management there are several cable glands, some of which are rubberized, which are placed on the incline next to the mainboard. The right chamber houses the hardware, which hardly radiates heat and does not have to be particularly cooled.

The Lian Li O11 Dynamic PCMR Special Edition 2nd Batch stands, slightly elevated, on rubberized steel feet, so that cool air can get into the case through the dust-filtered base. Thanks to the chimney effect, the warm air rises to the top, where it escapes through the lid, which is also equipped with a dust filter. Two dust filters cover the two perforated grids in the right side part.

Space for a second power supply
There is an HDD cage for mounting the data storage devices, in which two 3.5-inch HDDs can be accommodated. The two slots can be reached from the rear of the housing; they are covered by a perforated panel. Two 2.5-inch SSDs can be mounted on the back of the mainboard tray. In addition, there are two more 2.5-inch brackets that are screwed to the bottom of the right-hand side panel. A total of two 3.5-inch and four 2.5-inch data carriers can be installed. The HDD cage can of course also be removed to make space for a second power supply unit that is installed vertically like the first.

Note: If you want to install your graphics card or even cards vertically in the Lian Li O11 Dynamic PCMR Special Edition 2nd Batch Midi-Tower, you can purchase the optional extension kit Lian Li O11D-1 (GELI-809). Only this kit is compatible with the Lian Li O11 Dynamic PCMR Special Edition 2nd Batch Midi-Tower! It includes an appropriately adapted slot bracket and a high-quality riser cable.

Technical details:
- Dimensions: 272 x 446 x 445 mm (W x H x D)
- Material: steel (interior), chrome-plated aluminum (front), tempered glass (front, side panel)
- Weight: approx 10.1 kg
- Color: space gray, silver
 -Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- 3x 120 mm (bottom)
- 3x 120 mm / 2x 140 mm (cover)
- 3x 120 mm (side part, front)
- Radiator mountings (waiver of fan slots):
- 1x max. 360 mm / 280 mm (cover)
- 1x max. 360 mm (floor, without SDD brackets)
- 1x max. 360 mm (side part, next to the mainboard)
- Filters: bottom, lid, side panel
Drive bays:
- 2x 3.5-inch drives (internal)
- 4x 2.5-inch drives (internal)
- Power supply: 2x ATX (optional)
- Expansion slots: 8
- I / O panel:
- 1x USB 3.1 Type-C (internal connection)
- 2x USB 3.0 Type-A (internal connection)
- 1x per audio in / out
- On / off switch
- Maximum graphics card length: 420 mm
- Maximum CPU cooler height: 155 mm
- Maximum network part length: 255 mm