Lamptron RW460 controller for water cooling - silver [LAMP-RW460S]

The Lamptron RW460 controller for water cooling not only offers extensive functionality, but also high compatibility. It runs up to four pumps / fans with or without PWM control and RGB products with or without digital RGB LEDs. The separate LC display can be attached to PCI slots, the numerous information can then be admired through a transparent side part made of hard or acrylic glass. It is controlled by an infrared remote control.

The features of the Lamptron RW460 controller for water cooling at a glance
Control board for pumps, fans and RGB LED lighting
Separate LC display with displays for temperature, voltage and speed
Sync Edition: Synchronization with mainboard or other RGB controller possible
Four channels for pumps / fans with or without PWM with up to 60 watts per channel
Four headers for up to 60 RGB LEDs (12VGRB)
Four headers for up to 60 digitally addressable RGB LEDs (5VDG)
Power supply via 4-pin Molex and SATA
Including infrared remote control
Maximum control of ventilation & lighting

The Lamptron RW460 controller for water cooling offers almost unlimited control over pumps and fans as well as RGB lighting. With up to 60 watts of power per channel, there is almost no limit. The fan controller supports fans with and without PWM. The power supply is via a 4-pin Molex connector. A total of up to four devices can be connected to the controller board.

In addition, four 4-pin RGB LED elements (12VGRB) and four digitally addressable 3-pin RGB devices (5VDG) can be connected. The additional power supply required is via a SATA connection. In addition, four temperature sensors are included, which can also be connected to the circuit board.

Including LC display and infrared remote control
Control of the lighting and the speed of the connected devices is carried out via the included infrared remote control. There, for example, the fans can either be set to quiet mode at 40 percent or to maximum mode. Or you can leave the control to the controller. In addition, the lighting modes are set via the remote control. The Lamptron RW460 can be connected to a mainboard or other RGB controller using the cable supplied and thus enables the synchronization of RGB and ARGB lighting with external control units.

Lamptron has included a stylish LC display so that you know how fast the pumps / fans are rotating and at what voltage they are currently running and what temperatures are inside the housing. It is attached to three free PCI slots and the output can be admired through a transparent side window. The controller board is connected to it with a cable and can be hidden somewhere in the housing.

Technical details:
Dimensions (board): 121.5 x 21 x 72.5 mm (W x H x D)
Dimensions (display): 140 x 12.5 x 60 mm (W x H x D)
Screen: 95 mm x 45 mm
Compatibility: 3x PCI slots (display)
Material: aluminum
silver
Channels: 4 (max. 60 W per channel)
Voltage: continuously 0 - 12 V
Connections:
1x 4-pin Molex
1x SATA
4x 2-pin temperature sensors
RGB LED connections:
4x 3-pin RGB (5VDG, up to 60 LEDs per channel)
4x 4-pin RGB (12VGRB, up to 60 LEDs per channel)
1x PC-RGB In
1x PC-ADD In

Scope of delivery:
1x controller board with cover made of acrylic glass
1x LC display
2x connection cable controller / display
4x temperature sensors
1x infrared remote control
Mounting material for display