A real eye-catcher is the front with the V-shaped cutout with a digital addressable RGB LED strip, the lighting of which is enhanced by an infinity mirror effect. A 120 mm fan pre-installed on the back, which is also equipped with digitally addressable RGB LEDs, cools and illuminates the spacious interior of the extremely chic midi tower, which can be admired through a tempered glass side panel. Overall, the distinctive Kolink Void impresses with its striking and modern design.
The features of the Kolink Void at a glance
- V-shaped neckline with infinity mirror effect and RGB lighting
- Tempered glass side panel for an unobstructed view inside
- For mainboards in ATX / Micro-ATX / Mini-ITX format
- A pre-installed 120 mm fan with digitally addressable RGB lighting
- Support for radiators up to 240 mm at the front
- Power supply cover with ventilation slots for a clean look
- Graphics cards up to 310 mm, CPU coolers up to 160 mm, power supplies up to 180 mm
Kolink Void: Exquisite design meets high performance
The digitally addressable RGB LED strips, the lighting of which is enhanced by an infinity mirror effect in the front, can be controlled via a switch on the I / O panel, just like the RGB LED fan installed on the rear in 120 mm format. Alternatively, the strips and the fan can also be connected and controlled to a suitably equipped mainboard thanks to the standardized 3-pin connector (5VDG). Then the switch for the RGB LED control can be used as a reset button. Thanks to the tempered glass side panel, the lighting can also be admired inside the Kolink Void.
In addition to the pre-installed fan, five more 120s can be installed, three of them on the front and two more on the lid. There is a magnetic dust filter on the honeycomb mesh. Side ventilation slots on the front and in the power supply cover provide additional airflow. As an alternative to the fans, there is also the option of placing a 240 mm radiator on the front.
The Kolink Void with lots of space for hardware
The entire interior is coated in black and provided with a power supply cover to achieve a particularly clean look. There is space for a permanently installed hard drive cage with brackets for two 3.5 or 2.5 inch drives and the power supply. A holder for a total of two 2.5-inch drives is attached to the back of the mainboard tray. The mainboard tray and the cover of the power supply offer numerous openings for sophisticated cable management. At the bottom there is a removable dust filter for an ATX power supply, which can be 18 centimeters long.
Pixel cars can be up to 31 centimeters long and CPU coolers can be up to 16 centimeters high. In addition, the I / O panel placed on the front has two USB 2.0 ports and two USB 3.0 Type A ports.
Dimensions: 190 x 430 x 400 mm (W x H x D)
Material: steel, tempered glass, plastic
Weight: approx.5.9 kg
Form factor: ATX, Micro-ATX, Mini-ITX
Total fans possible:
3x 120 mm (front)
2x 120 mm (lid)
1x 120 mm (back)
1x 120 mm (back)
1x 240 mm (front)
Filter: cover, bottom
2x 3.5 / 2.5 inches (internal)
2x 2.5 inches (internal)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 2.0 (internal connection)
2x USB 3.0 (internal connection)
1x per audio in / out
RGB / reset switch
Maximum graphics card length: 380 mm
Maximum CPU cooler height: 160 mm
Maximum power supply length: 180 mm