Kolink Stronghold Overseer Midi-Tower - black [STRONGHOLD OVERSEER]

In addition to an ATX mainboard, 340 millimeter long graphics cards, which can also be installed vertically with an optional riser card, fit in the spacious interior. There is also enough space for water cooling: there is space for a 360 radiator on the front and a 280 heat exchanger can be installed on the cover. If you prefer air cooling, you can fall back on the two pre-installed 120 millimeter fans and put a 175 millimeter high CPU cooler on the CPU. The many options and last but not least the tempered glass side panel make the Kolink Stronghold Overseer an attractive case for extensive gaming setups.

The features of the Kolink Stronghold Overseer Midi-Tower at a glance:
- Front in the look of brushed aluminum with mesh
- Two pre-installed 120 millimeter PWM fans on the front and rear
- Side part made of tempered glass for an unobstructed view inside
- Designed for ATX, Micro-ATX and Mini-ITX mainboards
- Vertical installation of a 2.5-slot graphics card is possible, riser card is available separately
- Space for 360 millimeter radiators on the front and 280 millimeter radiators on the lid
- I / O panel with 2x USB 3.0 Type-A, 1x USB 2.0 and 2x 3.5 mm jack (each 1x audio in / out)
- Graphics cards up to 340 millimeters, CPU coolers up to 175 millimeters, power supplies up to 190 millimeters

Graphics cards can be up to 340 millimeters long. They can be installed both horizontally and vertically. The bracket required for vertical installation is included with the case, but a riser card must be purchased separately. CPU coolers can be up to 175 millimeters high. In addition, the I / O panel on the front has a USB 2.0 port and two USB 3.0 Type A ports.

Technical details:
- Dimensions: 215 x 460 x 415 mm (W x H x D)
- Material: steel, tempered glass, plastic
- Weight: approx. 6.5 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
Total fans possible:
- 3x 120 / 2x 140mm (front)
- 2x 120/140 mm (cover)
- 1x 120 mm (rear)
Pre-installed:
- 1x 120 mm (front) PWM
- 1x 120 mm (rear) PWM
Radiator mountings:
- 1x 360/280 mm (front)
- 1x 280/240 mm (cover)
- Filter: lid, bottom
Drive bays:
- 2x 3.5 / 2.5 inch (internal)
- 3x 2.5 inches (internal)
- Power supply: 1x standard ATX (optional)
- Expansion slots: 7 + 2
I / O panel:
- 1x USB 2.0 (internal connection)
- 2x USB 3.0 (internal connection)
- 2x 3.5 mm jack (each 1x audio in / out)
- 1x reset switch
- Maximum graphics card length: 340 mm
- Maximum CPU cooler height: 175 mm
- Maximum net part length: 190 mm