Kolink INSPIRE K8 ARGB MIDI Tower - Black [INSPIRE K8]

The side part made of slightly tinted temperer glass provides a look inside, such as an ATX motherboard. Also otherwise fits strong hardware and enough drives in the MIDI Tower to accommodate an optimal gaming system. This makes the Kolink Inspire K8 ARGB to the ideal case for spares with a sense of extraordinary design.

The Kolink Inspire K8 ARGB MIDI Tower at a glance:
Striking front with 3D diamond pattern and ARGB strip
Side part made of temperer glass and power supply cover for a tidy look
1x pre-installed 120 mm ARGB fan on the back
Space for up to 6x 120 mm fan, 240 radiators on the front
Room for up to 300 mm long graphics cards and CPU coolers up to 155 mm
I / O panel with 1x USB 3.0, 2x USB 2.0 and RGB LED control
Space for 2x 3.5 / 2.5-inch and 4x 2.5-inch drives
Inspire K8 ARGB: inexpensive MIDI housing from Kolink for gamers

The Kolink Inspire K8 ARGB is a very cheaper Midi Tower suitable for style-conscious gamers. Particularly striking is the front with the 3D diamond pattern. The front is accentuated by a digitally addressable RGB LED strip, which can be controlled optionally via a switch on the I / O panel or directly via the mainboard. At the top of the front cover is the I / O panel with the two USB 2.0 ports and the USB 3.0 port as well as the controller for RGB lighting. A side panel made of slightly tinted temperer glass completes the stylish design of the Inspire K8 RGB.

Inside, an ATX, Micro-ATX or a mini-ITX mainboard has space. Installed graphics cards may be whopping 300 mm long, for CPU coolers stays enough room for most common models with 155 mm. For cable management, there are optimally placed cable glands on the motherboard tray and in the power supply cover as well as enough space between motherboard tray and right side part. Power supplies may be up to 180 mm long.

Lush cooling options, plenty of space for drives
Up to six 120 mm fans have space in the spacious gaming case. In addition to the already occupied 120 mm slot on the back there are two more on the lid and at the front. The pre-installed fan is also equipped with a digitally addressable RGB lighting, which can be controlled as the front-side LED strip either via the I / O panel or a correspondingly equipped motherboard.

On the lid, a honeycomb pattern ensures that the hardware inside does not dust in the interior and at the same time for a decent fresh air supply. Of course, the power supply is protected against dust at the bottom with a filter. There is enough space for water cooling. At the front, a 240er radiator can be accommodated.

Behind the power supply cover, there are drop-and-lock slots in which either two 3.5 or 2.5-inch drives can be accommodated. On the power supply cover or next to the mainboard, another 2.5-inch disk can be screwed on. With its spacious interior, the Kolink Inspire K8 ARGB is predestined to realize powerful gaming setups.

Technical details:
- Dimensions: 426 x 200 x 362 mm (H x W x D)
- Material: steel (housing), temperer glass (side panel), plastic (front)
- Weight: approx. 4 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total fan possible:
- 3x 120 mm (front)
- 2x 120 mm (lid)
- 1x 120 mm (back)
- Preinstalled by this:
- 1x 120 mm (backside, ARGB)
- Radiator mountings:
- 1x max. 240 mm (front)
- 1x max. 120 mm (back)
- Filter: floor
- Drive shafts:
- 2x 3.5 / 2.5 inch max. (Intern, HDD cage under the power supply cover)
- 4x 2.5 inch max. (Internally, on the power supply cover and next to the mainboard)
- Power supply: 1x Standard ATX (optional)
- Expansion slots: 7
- I / O panel:
- 1x USB 3.0
- 2x USB 2.0
- 2x 3.5 mm jack (1x audio-in / -out each)
- RGB control
- Maximum graphics card length: 300 mm
- Maximum CPU cooler height: 155 mm
- Maximum power supply length: 180 mm