Kolink Citadel Glass SE ARGB Micro-ATX case - black [CITADEL GLASS SE]

Two strips with digitally addressable RGB LEDs adorn both sides of the front. In addition, there is now a modern USB 3.2 type C port on the I / O panel. Like its predecessor, the Citadel Glass SE has a side door made of tempered glass and three pre-installed 120 mm PWM fans, which are also digitally addressable RGB-LEDS are equipped. This means that every high-end hardware can be optimally presented.

The features of the Citadel Glass SE Midi-Tower at a glance:
- Tempered glass front with two pre-installed 120 mm PWM fans including ARGBs
- Two strips placed on the side with digitally addressable RGB LEDs on the front
- A pre-installed 120 mm PWM fan with digital RGB LEDs on the back
- An RGB controller hub with numerous effects and modes including a remote control
- Synchronization of the RGB lighting via mainboard possible
- Tempered glass side door for an unobstructed view of the interior
- For Micro-ATX and Mini-ITX mainboards
- Two vertical PCI slots for graphics cards (up to 2.5 slot height, riser cable available separately)
- Space for a 280 mm radiator on the front and a 240 mm on the lid
- I / O panel with 1x USB 3.2 type C port, 2x USB 3.0 and HD audio
- Graphics cards up to 345 mm, CPU coolers up to 190 mm, power supplies up to 200 mm

Kolink Citadel Glass SE: Improved aesthetics, attractive lighting
A total of three 120 mm PWM fans are already pre-installed in the Kolink Citadel Glass SE. Their digitally addressable RGB lighting can be controlled via the RGB controller and fan hub with remote control that are also included. Alternatively, the lighting can also be connected to a mainboard with a corresponding 3-pin 5VDG header and controlled using the mainboard manufacturer's software. In addition to attractive lighting, the fans also offer good performance and can be connected to a total of six 4-pin PWM headers on the hub.

In addition to the pre-installed fans, two 120 or 140 mm fans can be installed on the cover. There is a magnetic dust filter over the honeycomb cover. Those who prefer water cooling can install a 280 mm radiator on the front and a 240 mm radiator on the lid. Thanks to the tempered glass side door, the hardware installed inside is not only clearly visible, but also easily accessible. Magnets keep the side door closed.

Kolink Citadel Glass SE: Lots of space for gaming hardware
The interior is completely black, and a power supply cover ensures a tidy and inconspicuous look. Underneath there is an HDD cage with space for two 3.5 or 2.5 inch drives. Two more 2.5-inch drives can be attached next to the mainboard. Both the mainboard tray and the power supply cover offer numerous openings for perfect cable management. There is 24 mm space behind the mainboard tray for cable routing. A removable dust filter on the floor protects the optional power supply, which is up to 200 mm long.

Graphics cards can be installed vertically. They can then be up to 2.5 slots high and 34.5 cm long for both vertical and horizontal installation. If a radiator is installed on the front, the length is reduced to 32 cm. A corresponding riser cable must also be purchased. There is 19 cm of space inside for a CPU cooler. In the I / O panel on the front of the lid there is a USB 3.2 port of type C as well as two USB 3.0 sockets and a 3.5 mm jack plug each for headphones and a microphone.

Technical details:
- Dimensions: 230 x 395 x 403 mm (W x H x D)
- Material: steel, tempered glass, plastic
- Weight: approx. 5.3 kg
- Color: Black
- Form factor: Micro-ATX, Mini-ITX
- Total fans possible:
- 2x 120/140 mm, 1x 180/200 mm (front)
- 2x 120/140 mm (cover)
- 1x 120/140 mm (rear)
- Pre-installed:
- 2x 120 mm (front, ARGB, PWM)
- 1x 120 mm (rear, ARGB, PWM)
- Radiator support:
- 1x 280/240 mm (front)
- 1x 240 mm (cover)
- Filter: lid, bottom
- Drive bays:
- 2x 3.5 / 2.5 inch (internal, HDD cage)
- 2x 2.5-inch (internal)
- Power supply: 1x standard ATX (optional)
- Expansion slot: 4 + 2
I / O panel:
- 1x USB 3.2 Type C (internal connection)
- 2x USB 3.0 (internal connection)
- 1x audio in / out each
- Reset switch
- Maximum graphics card length: 345 mm (300 - 320 mm with radiator on the front)
- Maximum height of the CPU cooler: 190 mm
- Maximum length of power supply: 200 mm