Kolink Balance ARGB Midi-Tower, tempered glass - black [BALANCE ARGB]

A powerful gaming setup based on an E-ATX mainboard can be admired through a tempered glass side panel, a power supply cover conceals unsightly cable clutter. The front with its large and fine-meshed ventilation grille not only ensures good airflow. The digitally addressable RGB LED strip placed in the middle accentuates the chic exterior. The lighting can be controlled via a switch on the I / O panel. Alternatively, the strip can also be connected and controlled directly on a mainboard. And a fine mesh with integrated dust filter on the top ensures proper ventilation. A pre-installed 120 mm fan, also with digitally addressable RGB lighting, ensures adequate ventilation.

The features of the Kolink Balance Midi-Tower at a glance:
- Chic midi tower for motherboards up to E-ATX format
- Tempered glass side panel for an unobstructed view inside
- Front with expansive, fine-meshed ventilation grille
- Subtle digitally addressable RGB lighting on the front
- A pre-installed 120 mm fan with digitally addressable RGB lighting on the back
- Up to five 120 mm and four 140 mm fans in total possible
- Space for graphics cards up to 370 millimeters, CPU cooler up to 160 millimeters
- I / O panel with control for RGB LEDs, 1x USB 3.0 and 2x USB 2.0
- Kolink Balance: Lots of space for powerful gaming hardware

Even if the external dimensions correspond to a midi tower, thanks to its sophisticated design, the Balance is designed to accommodate a mainboard even in the E-ATX format. There is also plenty of space for graphics cards with 370 millimeters to the front. At 160 millimeters, there is also enough space for common CPU coolers. A cover hides the power supply and the HDD cage, in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the back of the mainboard bracket.

If you rely on air cooling, you will find enough slots for 120-millimeter fans. Three 120 mm or two 140 mm fans can be attached to the front. Either two 120 mm or two 140 mm fans can be attached to the lid. The lid is provided with a mesh through which air can flow almost unhindered. A dust filter ensures that the hardware inside does not have to be constantly cleaned. Another removable dust filter is on the floor. At the back, a powerful 120 millimeter fan with digitally addressable RGB LEDs already occupies the available slot. There is space for a 280 mm or 360 mm radiator on the front, another 280 mm radiator can be attached to the lid and the pre-installed fan on the back can be replaced by a 120 mm heat exchanger.

Tempered glass and RGB LEDs skilfully showcase hardware
Sophisticated cable management can be achieved through well-placed bushings and terminals. The spacious interior can be admired through the tempered glass side panel. A strip with digitally addressable RGB LEDs is attached in the middle of the front. A switch on the I / O panel is responsible for controlling it, including lighting effects. Alternatively, the strip can also be connected and controlled directly on the mainboard. In addition to the RGB switch and a power and reset switch, there is also a USB 3.0 slot and two USB 2.0 ports as well as 3.5 millimeter sockets for headphones and microphone and finally a power and an HDD LED.
Technical details:
- Dimensions (H x W x D): 425 x 210 x 470 mm
- Material: steel, tempered glass, plastic
- Weight: approx.5.7 kg
- Color: Black
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total fans possible:
- 2x 120/140 mm (lid)
- 3x 120 or 2x 140 mm (front)
- 1x 120 mm (back)
Pre-installed:
- 1x 120 mm back
- Radiator mountings:
- 1x 360/280 mm (front)
- 1x 240/280 mm (lid)
- 1x 120 mm (back)
- Filters: cover, bottom, front
Drive bays:
- 2x 3.5 / 2.5 inch (internal, HDD cage)
- 2x 2.5 inches (internal, mainboard tray)
- Power supply: 1x standard ATX (optional)
- Expansion slots: 7
I / O panel:
- 1x USB 3.0 type A (internal connection)
- 2x USB 2.0 (internal connection)
- 1x per audio in / out
- 1x RGB switch
- Maximum graphics card length: 370 mm
- Maximum CPU cooler height: 160 mm