Jonsplus i100 Pro Mini-ITX case - silver [i100PRO-A Silver]

The compact case impresses with its modular structure and high compatibility with high-performance hardware components. The flexible interior makes it suitable for powerful gaming systems and discreet desktop computers.

The features of the Jonsplus i100 Pro Mini-ITX housing at a glance:
- Versatile mini-ITX housing
- - Noble design made of aluminum and steel
- Two side panels with generous air inlets
- Modular structure with flexible design options
- Space for a 360/280 radiator in the lid
- A total of up to six 120 or four 140 mm fans are possible
- Including riser cable for vertical installation of the graphics card
- Space for up to 1x 3.5- and 2x 2.5-inch drives

The modular Jonsplus i100 Pro in detail
Externally, the i100 Pro from Jonsplus impresses with its elegant design made of brushed aluminum and the flawless workmanship. Inside, the mini-ITX case is extremely flexible and can accommodate full-blown gaming hardware. By changing the mainboard tray, the rear wall of the case and the positioning of the power supply bracket, you have three options for hardware equipment.

Dual-chamber design with vertical GPU and with AIO cooler:
The dual-chamber structure places the CPU and GPU in separate heating chambers, which benefits the cooling of the components. With this setup, an SFX power supply is recommended to allow sufficient airflow between the power supply and the graphics card.

Graphics cards: 345 - 373 x 160 x 62 mm (L x W x H)
CPU cooler: max. 77 mm height
Radiator: 360/280/240/120 (max. 55 mm thickness (radiator + fan))
Power supply: ATX / SFX with max. 175/150 mm length (with / without floor fan)
Fan: 6x 120 / 4x 140 mm
Single-chamber design with horizontal GPU and CPU air cooler:
The single-chamber construction enables the installation of a large CPU air cooler together with a long high-end graphics card and a full-blown ATX power supply.

Graphics cards: 345 - 373 x 160 x 62 mm (L x W x H)
CPU cooler: max. 166 mm height
Power supply: ATX / SFX with max. 140 mm length
Fan: 3x 120 / 2x 140 mm

Single-chamber design with horizontal GPU and AIO cooler:
Anyone who prefers to use an AIO in the single-chamber structure can install a radiator up to 360 mm in size. There is also enough space for long high-end graphics cards. Due to the size of the radiator, the choice is limited to an SFX power supply unit with a maximum length of 115 mm.

Graphics cards: 345 - 373 x 160 x 62 mm (L x W x H)
Radiator: 360/280/240/120 (max. 55 mm thickness (radiator + fan))
Power supply: SFX with a maximum length of 115 mm
Fan: 3x 120 / 2x 140 mm

The housing feet are also modular and their length can be adapted to the needs of the system. Higher housing feet make it easier to suck in fresh air through the housing base.

All three configurations take advantage of the natural chimney effect. The generous openings in the base and in the lid create a draft from bottom to top, which benefits all installed components. The removable filters in the bottom, lid and back of the Jonsplus i100 Pro keep the inside clean and dust-free.

There are two 2.5-inch mounting spaces for data carriers, which, however, limit the length of the installed graphics card to 345 mm. An additional 3.5-inch hard drive can be installed behind the front panel of the housing.

Technical details:
- Dimensions (without feet): 194 x 307 x 435 mm (W x H x D)
- Feet: 14.5 mm (single), 20.5 mm (double)
- Material: aluminum, steel, plastic
- Weight: 6.7 kg
- silver
- Form factor: Mini-ITX, DTX (170 x 203 mm)
- Total fans possible:
- 3x 120 mm / 2x 140 mm (cover)
- - 3x 120 mm / 2x 140 mm (floor)
- Fan (pre-installed): none
- Dust filter: lid, bottom, back wall (removable)
- Radiator mountings:
- 1x 360/280 mm (cover)
- Drive bays:
- 2x 2.5 inches
- 1x 2.5 / 3.5 inch
- Power supply: ATX, SFX (optional)
- Expansion slots: 2 (dual slot, vertical)
I / O panel:
- 1x USB 3.0 type A
- 1x USB 3.1 Type C
- 1x 3.5 mm jack (audio out)
- 1x 3.5 mm jack (audio-in)
- 1x power button
 -Special feature: modular structure with three modes, PCIe 3.0 x16 riser module for GPU assembly, vertical GPU assembly
- Compatibility graphics card:
- Length: max. 373 mm (345 mm with installed SSD cage)
- Height: max. 160 mm
- Width: max. 62 mm
- Compatibility CPU cooler:
- With vertical graphics card: 77 mm high
- With horizontal graphics card: 166 mm high
- Compatibility radiator: max. 55 mm thickness (radiator + fan)
- Compatibility power supply:
- With vertical graphics card: ATX, SFX (max. 175/150 mm length (without / with floor fan))
- With horizontal graphics card: ATX, SFX (max. 140/115 mm length (without / with air cooler))