- Dual chamber construction with separate heat chambers
- Generous air inlets and chimney effect for high airflow
- Space for a 360 radiator
-A total of up to four 120 mm fans possible
- Space for up to two 2.5" drives or two 3.5" drives
- For graphics cards up to 345 mm in length
- Generous mesh areas for improved cooling
The VR4 is the big sister of the VR3. The larger model has the same advantages as the VR3, but at the same time offers more space for installing powerful hardware and cooling solutions. The front and side panels and even the top cover of the Jonsbo VR4 are completely riddled with air holes to ensure optimal airflow for your components.
On the outside, the Jonsbo VR4 impresses with its elegant design made of brushed steel and the flawless workmanship. The simple design is only interrupted by a power button, a USB 3.0 type A port and a USB type C port on the lid.
Space for powerful gaming graphics cards
With its compact dimensions, the VR4 from Jonsbo may appear small, but full-fledged gaming hardware can be accommodated inside. Thanks to the space-saving and clever two-chamber design, the housing can accommodate not only an ATX mainboard but also a graphics card with a length of up to 345 mm. If you install a radiator in the front of the case, the length of the graphics card should not exceed 320 mm.
There is space for up to two 2.5 or 3.5 inch drives in the VR4. You can install three drives at the same time. If you install two 3.5-inch drives, there is still space for a 2.5-inch drive, for example. If you mount two 2.5-inch drives, you can also install a 3.5-inch drive.
Air or water cooling for your gaming setup?
In addition to saving space, the concept of the two separate chambers also has advantages when it comes to cooling the components. A total of up to three 120 mm fans can be installed in the front of the case.
In combination with the generous air passages, which extend over the entire housing wall and the lid, excellent airflow is ensured. Alternatively, a 360 mm radiator for water cooling can be installed on the front. There is also space for another 120 mm fan on the back.
The Jonsbo VR4 is flexible when it comes to the power supply. A full-fledged ATX power supply can be installed here for particularly power-hungry gaming systems. If you prefer a smaller standard, you can alternatively mount an SFX power supply. As the icing on the cake, the case comes with a freely positionable logo as a magnetic sticker.
Technical details:
- Dimensions: 216 x 440 x 398 mm (W x H x D)
- Material: steel
- Weight: 7.2kg
- Color: Black
- Form factor: ATX
- Fan total possible:
- 3x 120mm / 2x 140mm (front)
- 1x 120mm (rear)
- Of which pre-installed: none
Radiator mounts:
- 1x 360mm (front)
- Dust filter: mesh (side, front, top cover, removable)
drive bays:
- 2x 2.5 inch
- 2x 3.5 inch
- Power supply: SFX, SFX-L, ATX (up to 150 mm, optional)
- Expansion Slots: 2 (dual slot, vertical)
I/O panel:
- 1x USB 3.2 Gen 1 Type A
- 1x USB 3.2 Gen 1 Type-C
- 1x 3.5 mm jack (audio in/out)
- 1x power button
- Maximum CPU cooler height: 167mm
- Maximum graphics card length: 345 mm (when installing a front radiator: 320 mm)
- Maximum graphics card height: 60 mm
- Maximum power supply length: 170 mm (up to 200 mm without radiator)
- What's included: Jonsbo VR4 ATX case