IN WIN 307 Midi Tower [307]

Of course, you can also program your own lighting patterns. The highlight, however, is the integrated microphone that illuminates the RGB LED lighting based on the room noise.

In addition, the white IN WIN 307 is made of high quality steel and equipped with a huge tinted tempered glass side window. The presentation of assembled hardware succeeds in such a housing particularly well, because the chassis is very high quality processed and allows a fancy arrangement of the hardware. Of course, the IN WIN 307 also comes with extensive cooling options.

The IN WIN 307 at a glance:
- Originally designed front with 144 addressable RGB LEDs
- Huge side window made of tempered glass
- Excellent workmanship & quality materials
- Vertical attachment of the top fans or the radiator
- Space for motherboards with ATX, Micro ATX or Mini ITX form factor
- I / O panel with 1x USB 3.1 type C, 2x USB 3.0 and RGB LED control
- Sufficient space for a strong air or water cooling
- 2x 3.5 "& 2x 2.5" drive slots available

Innovative design with clear lines
The IN WIN 307 combines a comprehensive functionality with an original aesthetic. Especially the front side with the optics of frosted glass stand out because of the incredible 144 RGB LEDs installed behind it. In addition to numerous pre-set lighting modes, the Wall-of-RGB can of course also be configured individually, for example with certain patterns. IN WIN provides the software called GLOW. In addition, a microphone is installed in the housing. The room sounds received above can also control the RGB LED lighting.

In addition, there are switches on the I / O panel that can be used to select the different lighting modes and adjust the brightness. The panel is located on the side of the front panel and houses, next to the lighting control switch, a modern USB 3.1 symmetric C slot and two Type A USB 3.0 slots.

Outside and inside: Hui!
In addition, the IN WIN 307 was mainly made of high-quality, 1.2 mm thick steel and impresses above all by its huge side window made of tempered glass. The 3 mm thick tempered glass side window can be opened quickly and, above all, without tools by means of a handle on the upper edge.

Of course, the interior also holds some surprises ready. For example, the power adapter is installed at the top of the case and is located behind a honeycomb-look air-permeable cover. A handy holder for graphics cards is also part of the delivery, because highly grown pixel accelerators can bring a lot of weight today. The interior accommodates ATX, micro-ATX, and mini-ITX motherboards, CPU coolers up to 160 mm high, graphics cards up to 350 mm in length, and power supplies up to 200 mm in length.
Extensive cooling options and numerous hard disk slots
The cooling concept in the IN WIN 307 is anything but standard. The theory is that "cool" air is sucked in from the dust filter-protected underside and blown out again at the top and back. There are a maximum of three 120 mm fans on the floor. The back can accommodate a 120mm fan or a 120mm radiator.

The peculiarity of the cooling concept lies in the cover of the power supply unit, because a maximum of three 120 mm fans or a radiator with a size of up to 360 mm can be mounted vertically on the honeycomb structure. The warm air should thus be carried past the power supply by the side wall of the housing (also with honeycomb structure) to the outside. The vertical orientation of the upper cooling components is particularly impressive due to the large side window, however, fans or radiators must not be more than 70 mm high. In order to give the user complete freedom in the choice of its housing cooling, no fans are included.

Of course IN WIN has also provided enough hard disk slots. On the front of the motherboard tray are two mounts for two 2.5-inch hard drives, which can be optionally supplemented by a third bracket. In addition, there are two additional 3.5 "hard drive brackets on the back of the motherboard tray.

Technical details:
- Dimensions: 238 x 537 x 501 mm (W x H x D)
- Weight: approx. 11.61 kg
- Material: Steel, tempered glass, plastic
- Color: white (outside), black (interior)
- Form factor: ATX, Micro-ATX, Mini-ITX
Fan (possible):
- 3x 120 mm (top, vertical)
- 3x 120 mm (floor)
- 1x 120 mm (back)
Radiator mountings (instead of the fans):
- 1x max. 360 mm (top, vertical)
- 1x max. 120 mm (back)
- Filter: bottom (removable)
Drive Bays:
- 2x 3.5-inch slots
- 2x 2.5-inch slots (3x possible)
- Power supply: 1x standard ATX12V (optional)
- Expansion Slots: 7
I / O panel:
- 1x USB 3.1 type C
- 2x USB 3.0
- 1x HD audio (In / Out)
- 1x lighting modes
- 2x illumination brightness
- Maximum graphics card length: 350 mm
- Maximum CPU cooler height: 160 mm
- Maximum power supply length: 200 mm