Fractal Design North Midi Tower - white [FD-C-NOR1C-03]

- Excellent airflow thanks to the side mesh panel, open front and mesh on the lid
- Two pre-installed 140 mm fans, eight possible in total
- Space for up to 240mm radiator on the lid, 360mm on the front
- Graphics cards up to 355 mm and CPU coolers up to 170 mm
- Removable dust filters on the bottom and front
- Up to two 2.5/3.5" HDDs and two 2.5" SSDs
- Front panel with USB 3.1 Type C, two USB 3.0 Type A and audio in/out

The Fractal Design North Midi Tower: Elegant design for gaming PCs
The North housing series from Fractal Design scores with its elegant Scandinavian design. Modern materials paired with real wood such as walnut or oak characterize the cases, rounded off by brass-colored accents and leather. But Fractal Design has not neglected the focus on functionality. Built-in high-end hardware is supplied with enough air from outside. With the Fractal Design North, your gaming setup fits perfectly into the living room.

Good airflow thanks to plenty of mesh
The Fractal Design North Midi Tower shines with a large side panel with a mesh area, mesh on the lid and an open front with a dust filter to supply your gaming hardware with fresh air.

There are also enough fan slots on the side, front, lid and back, which can be equipped with both 120 mm and 140 mm fans. Two Aspect 140 PWM fans are pre-installed at the front. Radiators up to 360 mm can be attached to the front. There is space on the lid for a 240 mm heat exchanger.

Extensive space for gaming hardware
Fractal Design North Midi-Tower graphics cards with a length of up to 355 mm can be attached to a motherboard in format up to ATX size. The CPU installed there has space for a cooler that is up to 145 m high. If you do without the side fan bracket, the cooler can even be up to 170 mm high.

Under the power supply cover
The Fractal Design North Midi Tower has space for an ATX power supply with a length of up to 255 mm. A modular power supply cage behind it can accommodate two 3.5-inch HDDs or two 2.5-inch drives. Two additional 2.5-inch drives can be attached to the back of the motherboard tray.

Well equipped
The I/O panel is attached to the top of the elegant case. There is a USB 3.1 Type-C, two USB 3.0 ports and two audio jacks as well as the beautifully designed power button and an eye-catching status LED. The elements are brass colored and therefore perfectly complement the elegant design. The lid can be removed and cleaned with a leather tab. In addition to the dust filter behind the front made of real wood, there is another one on the bottom to protect the power supply.

Technical details:
- Dimensions: 215 x 469 x 447 mm (W x H x D)
- Material: steel, plastic, wood
- Weight: approx. 7.6 kg
- Color: White, Black, Oak
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- 3x 120 / 2x 140 mm (front)
- 1x 120 mm (back)
- 2x 120 / 140 mm (side)
- 2x 120 / 140 mm (lid)
- Of which preinstalled:
- 2x 140 mm (front)
- Dust filter: front, bottom
- Radiator mountings:
- 1x max. 360 mm (front)
- 1x max. 120 mm (back)
- 1x max. 240 mm (lid)
- Drive bays:
- 2x 3.5 / 2.5 inch (internal)
- 2x 2.5 inches (internal)
- Power supply: 1x standard ATX (optional) up to 255 mm length
- Expansion slots: 7
- I/O panel:
- 1x USB 3.1 Type C
- 2x USB 3.0
- 2x 3.5 mm jack (1x audio in/out each)
- Maximum CPU cooler height: 170mm, 145mm with side fan bracket
- Maximum graphics card length: 355 mm