Fractal Design Meshify 2 Lite RGB Midi Tower Light Tint, tempered glass, black [FD-C-MEL2A-05]

- Mesh front on hinges
- 9 fans possible - 4x 140 mm pre-installed
- Space for 360 radiator on the front and in the lid
- Graphics cards up to 451 mm & CPU coolers up to 185 mm
- Up to 4x 2.5"/3.5" HDDs & 4x 2.5" SSDs
- Front panel with 1x USB 3.1 Type C, 2x USB 3.0 Type A and audio in/out

Fractal Design Meshify 2 Lite: Airflow case with RGB lighting
The Fractal Design Meshify 2 Lite RGB Midi Tower shines with large mesh areas in the front and on the lid. This variant of the case from Fractal Design's Meshify series is able to accommodate large E-ATX boards up to 285 mm. Fractal Design also relies on a modular structure here. The interior can be expanded to include two holders for 2.5-inch drives using brackets. The side panels can be opened without tools and allow easy access to the interior. Dust filters on the top and bottom of the case keep the inside of your system clean and dust-free.

Visually it stands out with its stylish design and the metal mesh grille that hangs on hinges. The mesh consists of asymmetrically distributed triangles that are modeled on the surface of diamonds. You can set colorful accents with the stylish RGB lighting and the integrated RGB controller. The tempered glass side window is slightly tinted and allows a good view of the installed hardware. Thanks to the mesh elements, the Meshify 2 Lite RGB has good airflow inside and can also accommodate powerful gaming hardware and up to four radiators.

The Fractal Design Meshify 2 Lite RGB: Midi tower in a modular design
A large mesh area dominates the front of the Meshify 2 Lite RGB midi tower from Fractal Design and the asymmetrical diamond structure of the metal grid creates an impressive 3D effect. The front is attached to hinges and can be easily opened.

Perfect for water cooling
A 280 or 360 mm radiator can be installed behind the front. There is also space for a large 360 radiator in the lid. Alternatively, three 120 or 140 fans can be installed there. There is still space on the bottom for a 240 mm radiator or two 120 mm or 140 mm fans.

Space for drives
As standard, there are two mounting slots for 3.5-inch drives and two dedicated 2.5-inch slots, which can be expanded to four each thanks to the modular design of the Meshifiy 2 Lite RGB.

Plenty of space for gaming hardware
.
Graphics cards can be up to 450 mm long with front fans installed. In addition to E-ATX, ATX, Micro-ATX and Mini-ITX mainboards, up to seven expansion cards can be installed in the housing.

CPU coolers with a height of up to 185 mm can be installed in the Fractal Design Meshify 2 Lite RGB. Power supplies can be up to 250 mm long. They disappear under a power supply cover. It has a removable flap on the front, for example to create space for a front radiator or to make it easier to install fans or a radiator on the floor.

Well equipped
The I/O panel is attached to the top of the elegant case. The I/O panel has a USB 3.1 Type-C, two USB 3.0 ports and two audio jacks as well as the beautifully designed power button and an inconspicuous status LED. Three Fractal Design Dynamic X2 GP 140 mm fans provide very strong airflow from the factory and remain very quiet. Up to six additional fans can be mounted in the lid, front and base. You will also find controls for the RGB lighting on the I/O panel.

Case fans or radiator fans can be connected to the integrated fan hub, which is powered via a SATA cable and can be connected to a motherboard to receive a speedometer signal. Three 4-pin fans and six 3-pin fans can be connected to the hub itself.

Technical details:
- Dimensions: 240 x 474 x 542 mm (W x H x D)
- Material: steel, plastic
- Weight: approx. 11.2 kg
- Color: Black
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- 3x 120 / 140 mm (front)
- 1x 120 / 140 mm (back)
- 2x 120 / 140 mm (floor)
- 3x 120 / 140 mm (lid)
- Of which preinstalled:
- 3x 140 mm (front)
- 1x 140 mm (back)
- Dust filter: lid and base
- Radiator mountings:
- 1x max. 280 / 360 mm (front)
- 1x max. 120 mm (back)
- 1x max. 360 mm (lid)
- 1x 240 / 280 mm (floor)
- Drive bays:
- Standard layout:
- 6x 3.5-/2.5-inch (internal)
- 2x 2.5 inches (internal)
- Storage layout:
- 14x 3.5-/2.5-inch (expandable with optional drive mounts and multibrackets
- 4x 2.5-in
- Power supply: 1x standard ATX (optional) up to 250 mm length with HDD cage installed
- Expansion slots: 7+2 (vertical)
- I/O panel:
- 1x USB 3.1 Type C
- 2x USB 3.0
- 2x 3.5 mm jack (1x audio in/out each)
- Maximum CPU cooler height: 185 mm
- Maximum graphics card length:
- Standard layout:
- 450mm
- Storage layout:
- 290mm