The lid is made in this version of transparent MABS polymer, concluding with a black trim plate made of anodized aluminum. For modding purposes two preparations for 3 mm LEDs are integrated into the transparent body. Inside the MX only a slightly modified structure of the EVO is used, which means that even when EK-Supremacy MX, the coolant flows through at high speed and little by resistors braked ("very high-flow design") comes a multitude of tiny channels of CPU cooler, which therefore lends itself well in combination with weaker pumps.
The offered variant of the EK Water Blocks EK-Supremacy MX is designed to be used with virtually any modern AMD board. The mounting of the cooler designed is so simple, especially in motherboards with AM3 (+), AM2 (+) FM2 (+) or FM1 for which the mounting mechanism is already set. In addition, EK Water Blocks delivers with 1 g of thermal paste.
This product is delivered without the necessary connections. These are therefore sold separately.
Material: Copper (base), MABS polymer (cover), anodized aluminum (end plate)
Connectors: 2x G1 / 4 thread
LED preparation: 2x 3 mm
AMD AM2 (+), AM3 (+), FM1, FM2 (+)
AMD: 939, 754, 940, F, C32 *
Scope of delivery:
EK-Supremacy MX Water Block with preassembled mounting mechanism
EK-TIM ectotherm thermal paste (1 g)
* Note: By default, the Water Block is designed for use on a motherboard with the AMD Socket AM2, AM2 +, AM3, AM3 + ready, FM1, FM2 or FM2 +. If the cooler with another AMD-base be used, the pre-assembled mounting mechanism must be taken apart before.
Attention: Please note that some coolers are shipped with a protective film on the bottom. These must be removed prior to installation and commissioning in each case. We assume no liability for damages resulting from corrupted or incorrect installation and improper use!