EK Water Blocks EK-Classic DP Front PC-O11D D-RGB + SPC PWM Distro Plate [3831109821855]

The EK-Classic DP Front PC-O11D D-RGB + SPC PWM from EK Water Blocks is a distro plate that was specially developed for use in the front of the midi tower Lian Li PC-O11 Dynamic.

The large acrylic glass distro plate offers an integrated SPC pump with PWM connection and digitally addressable RGB lighting.

The features of the EK-Classic DP Front PC-O11D D-RGB + SPC PWM Distro-Plate at a glance:
- Extremely chic distro plate, optimized for the O11 dynamic case by Lian Li
- Integrated SPC pump with 4-pin PWM connection
- Eleven G1 / 4-inch ports, suitable for one CPU and two GPU coolers
- Works in the O11 Dynamic with a radiator
- Made of transparent acrylic glass with high quality seals
- Integrated digitally addressable RGB LED lighting with common 3-pin 5VDG connection

The features of the EK-Classic DP Front PC-O11D D-RGB + SPC PWM Distro-Plate in detail
The EK-Classic DP Front PC-O11D D-RGB + SPC PWM is more than just a distributor plate for custom water cooling loops. The filling quantity and the integrated SPC pump make the distributor plate a full-fledged reservoir. With a delivery head of 2.2 meters and a maximum flow rate of 250 litres per hour, the specifications of the pump are quite impressive. The PWM pump is connected to the mainboard via a 4-pin connector. For example, in addition to a radiator, a CPU cooler and two GPU coolers can also be connected to the eleven G1 / 4 ports. The remaining three connections are fill and drain ports.

The distro plate, which is only suitable for Lian Li's O11D series, is screwed into the front of the housing.

The EK-Classic DP Front PC-O11D D-RGB + SPC PWM is made entirely of transparent acrylic glass and thus provides a view of the coolant flowing through, which is sealed off by high-quality seals and O-rings on the G1 / 4 ports. The distro plate is a real eye-catcher thanks to the integrated RGB lighting. The strip can be connected to common 5VDG slots on a mainboard via the 3-pin connector. The lighting can be controlled either via ASUS Aura Sync, ASRock Polychrome Sync, Gigabyte RGB Fusion and MSI Mystic Light Sync.

Technical details:

Material: acrylic glass, plastic, graphite (pump), PPS-GF30 and EPDM (seals)
Colour: transparent
Connections: 11x G1 / 4 ports
Possible connections:
Max. 1x radiator
Max. 1x CPU cooler
Max. 2x GPU coolers
Pump:
Type: SPC PWM
Voltage: 12 V.
Power consumption: 6 W.
Head: 2.2 m
Flow rate: 250 L / h
Liquid temperature: 10 ° to 50 ° C
Connection: 4-pin PWM
Cable length: 50 cm
RGB LED Strip:
Voltage: 5 V
Current: 0.3 A.
Connection: 3-pin 5VDG
Compatibility: ASUS Aura Sync, ASRock Polychrome Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync

Official compatibility of EKWB:
Lian Li O11D Dynamic

PLEASE NOTE:
- Compatible only with Lian Li PC-O11D
- The SPC pump is water lubricated, in other words, it uses a wet rotor design. Therefore, it is strongly recommended not to run the pump dry.
- This product is NOT compatible with DDC Heatsink Housing!
- The distribution plate is not compatible with DDC style pumps!
- The Lian Li PC-O11D is only for showcase and is not delivered with the product