Overview of the DimasTech X-Hash Mining Rig:
- Specially designed frame for up to ten dual-slot graphics cards
- Robust 1.5 mm thick steel, powder-coated in black
- Compatible with motherboards in the form factor ATX to Mini-ITX
- Mounts for up to ten 120mm fans
- Space for 2x 2.5-inch SSD or 1x 3.5-inch Hdd
- Room for two 220 mm power supplies
The perfect case for crypto miners
The X-Hash Mining-Rig is, like the other DimasTech products, made of high-quality steel, stamped with a logo of the manufacturer and then powder-coated in black. Although it is a mining rig, DimasTech always keeps an eye on the design of its products. But that also applies in a special way to the functionality.
As many as ten graphics cards with a dual-slot height fit into the X-Hash Mining Rig. They are almost installed on the second floor of the housing. On the ground floor have the motherboard and up to three power supplies space. In the floor of the upper floor, there are recesses for the cable routing from the poker cards to the mainboard. At key points, there are tapped holes and slots, such as for fixing graphics cards or riser cards.
At the top there are additional mounts for six out of ten 120 mm fans, which, according to the manufacturer, ideally lead the waste heat away from the graphics cards. Below there are again cutouts for four 120-mm fans, which remove the hot air from the power supplies and the motherboard and CPU. With the motherboard there is the choice of the form factor ATX down to mini-ITX, because with the mining graphics cards are crucial, not the Mainboard or the CPU.
To store the operating system and the shredded cryptocurrency, there are mounts for either two 2.5-inch SSDs or one 3.5-inch HDD. The entire mining rig stands on four rubber feet to absorb vibrations. Assembly material is of course included in the X-Hash Minig-Rig.
- Dimensions: 875 x 330 x 375 mm (W x H x D)
- Material: steel (1.5 mm)
- Weight: 10 kg
- Color: Black
- Form factor: ATX, Nano-ITX, Micro-ATX, XL-ATX, Mini-ITX
- Fan (optional):10x 120 mm
- Drive Bays:2x 2.5 inches or 1x 3.5 inches
- Expansion Slots: 10 x GPU dual slot
- Power adapter (optional): 3x standard ATX
- Maximum power supply length: 220 mm
- 1x X-hash mining rig
- 1x set of rubber feet
- 1x set of M3 knurled screws
- 1x set 6-32 UNC knurled screws
- 1x set of rubber washers
- 1x set of M4x10 Phillips screws
- 1x set of M3x6 Phillips screws
- 1x set of spacers H6.5