The RMI range depends then clearly to the discerning traveler. These power supplies combine according to almost all features in the area Netzteilbau. Special features of this power supply series from Corsair are the use of high-quality Japanese capacitors, a fully modular cable management system, a very high efficiency 80 PLUS Gold level, a high quality workmanship and a just seven-year-long warranty.
High-quality technology in noble-simple design with high functionality, that is the principle with respect to the external design of the RMI. With the exception of the black-white sticker on the side of the power supply is designed decently. A large 135 mm fan ensures adequate cooling of the electronics and is also controlled depending on the heat, and in addition provides a hydrodynamic FDB bearings for a smooth and quiet operation. Below a power output of about 400 watts, the fan also does not rotate, the Corsair PSU is thus semi-passive designed to work completely silent at idle.
The efficiency achieved on average a 50 percent utilization at least 90 percent, therefore, it was awarded the "80 Plus Gold" certificate. With impressive 1000 watts total output sophisticated dual-GPU computer and triple-SLI be permanently reliably supplied itself. Corsair leaves the decision on the allocation of 83.3 amps on the + 12-volt rail users: By default, the RM1000i is a multi-rail power supply, via the integrated software interface and the in-house Link software, the power supply on Single Rail be changed. Full safety in everyday life, optimum suitability for extreme overclocking with a mouse click!
In order to make the enormous power and every instrument available, the RM1000i offers enough connections. All connectors are designed this modular and can be connected only when needed with the power supply - free air flow for optimum cooling of all components. In addition to the 20 + 4-pin connector and the 4 + 4-pin and an additional 8-pin for powering the motherboard and CPU are eight 6 + 2-pin PCIe plugs for up to four high-end graphics cards ready. With twelve SATA and eleven 4-pin Molex all systems in this performance class without an adapter-craft solutions can operate dozens drives, fans, water pumps, front panel and so on can be in addition to the standard components connected directly. In addition, two floppy connectors and a "Corsair Link Digital 'standing - and a" Corsair Link USB "port is available.
In the connection to the motherboard is possible. After downloading a special software from Corsair ("Corsair Link Dashboard") important parameters for performance and efficiency can then be read from the Windows operating system out. In addition, the fan speed can be adjusted manually.
Dimensions: 150 x 86 x 180 mm (W x H x D)
Weight: 2.03 kg
Fan: 135 mm (FDB bearings, automatic control, semi-passive)
Efficiency: min. 90/87/87% at 50/20/100% utilization (115V, efficiency in the European 230-volt power is slightly higher), including 80 Plus Gold certificate.
Form Factor: ATX12V 2.4 / EPS 2.92
Power: 1.000 W
+ 3.3V: 25A
+ 5V: 25A
+ 3.3V & + 5V: 150W
+ 12V: 83.3 A / W 1000
-12V: 0.8A / 9.6W
+ 5Vsb: 3 A / 15 W
1x 20-pin ATX + 4
1x 4 + 4-pin EPS12V / ATX12V
1x 8-pin P8
6x 6 + 2-pin PCIe
11x 4-pin Molex (max. 750 mm)
2x Floppy (Adapter)
1x Corsair Link Digital
1x Corsair Link USB
Manufacturer Warranty: 7 years