With its simple and modern design as well as its compact dimensions, the housing fits well into any setup. The interior offers a surprising amount of space and good ventilation.
The features of the Cooler Master Silencio S400 TG at a glance
- Chic mini tower for micro ATX and mini ITX mainboards
- Pre-installed noise insulation made of vinyl and foam
- Clear tempered glass side panel
- Steel front door that can be fitted on both sides
- Space for two dual radiators
- Two pre-installed silent fans
- Modular internal layout
Cooler Master Silencio S400 TG: flexible mini tower with sound insulation
Up to five case fans can be installed in the Cooler Master Silencio S400 TG: 120 mm fans can easily be attached to the rear and two 120 or 140 mm fans to the front. There is space for a 120 or 140 model on the cover, by removing the 5.25-inch slot, a second fan can be attached to the housing cover. From the factory, the Silencio S400 TG offers two pre-installed Silencio FP type 120 mm fans, which are controlled by a PWM signal. There is space for a maximum of 167 millimeter high CPU cooler in the case.
The Cooler Master Silencio S400 TG also offers several options for installing custom and full water cooling: a 120 radiator can be attached to the rear wall and the front is prepared for a 240 or 280 millimeter radiator. There is space for a 120 or 140 millimeter radiator on the lid; if the 5.25-inch cage is omitted, a 240 dual radiator can also be installed there.
Cooler Master Silencio S400 TG: design and noise insulation
The no-frills housing offers clear shapes and smooth surfaces and is completely black inside and out. The mini tower has been developed with low operating noise in mind and is equipped with extensive vinyl and foam noise insulation that dampens vibrations and volume.
Both the right side part and the steel front door are insulated on the inside. The left side panel is made of tempered glass and provides a view of the installed hardware. The lid has a removable cover that can be removed for ventilation.
There are dust filters in the front, in the bottom and in the lid. The front door can be mounted with the hinges on the left or right so that it pivots in the desired direction when opened. The I / O panel is located on the right side of the housing cover and contains two USB 3.0 ports, a combined audio port and an SD card reader.
Space for drives and components
The interior of the Cooler Master Silencio S400 TG offers space for motherboards in Micro-ATX and Mini-ITX form factors and a total of four expansion slots that can be used, for example, for graphics cards up to 319 millimeters long. There is space for up to 140 millimeter long ATX power supplies under the power supply cover; even 325 millimeters without the removable HDD cage.
The HDD cage offers space for a total of three 3.5-inch drives. Two 2.5-inch SSDs can be installed on the back of the mainboard tray and on the power supply cover. The ODD cage offers space for a 5.25-inch drive and the possibility of mounting a 3.5-inch drive.
Dimensions: 210 x 408 x 418 mm (W x H x D)
Material: steel, plastic, tempered glass
Weight: 8.31 kg
Format: Micro-ATX, Mini-ITX
Total fans possible:
2x 120 / 2x 140 mm (front)
2x 120 / 2x 140 mm (cover; without ODD cage)
1x 120 mm (back)
1x 120 mm Silencio FP (front, 800-1,400 rpm, PWM)
1x 120 mm Silencio FP (rear, 800-1,400 rpm, PWM)
Radiator mountings (partial waiver of HDD, ODD and / or fan slots):
1x max. 240/280 mm (front)
1x max. 240 mm (cover; without ODD slot)
1x max. 120 mm (back)
Dust filter: front, bottom, lid
1x 5.25 inch (external; ODD cage)
1x 3.5 inch (internal; under ODD cage)
3x 3.5 inches (internal; HDD cage)
4x 2.5 inches (internal)
Power supply (optional): ATX
Expansion slots: 4
I / O panel:
2x USB 3.0
1x 3.5 mm jack (4-pin / TRRS, audio in / out)
1x SD card reader
Maximum graphics card length: 319 mm
Maximum CPU cooler height: 166 mm
Maximum power supply length: 140 mm (325 mm without HDD cage and front radiator)