Cool master MasterCase MC600P TG Midi-Tower - black [MCM-M600P-KG5N-S00]

 Behind the stylish removable front of the MasterCase MC600P hides a mesh front, which ensures optimal airflow. There is also an extensive I / O panel with two USB 3.0 and two USB 2.0 slots.

The interior has a modular design, and is extremely generously dimensioned and offers space for motherboards up to the E-ATX format, long gaming graphics cards and appropriate air or water cooling for high-performance hardware. The cooling performance is particularly good due to the numerous ventilation options. Especially in this variant, the flexibly mounted lid and the front, which can be raised for better ventilation something.

The features of the MasterCase MC600P at a glance
- Modern modular Midi Tower in gray with black interior
- Side part made of tempered glass
- Mesh grille on the front for better airflow
- Graphics cards up to a maximum of 412 mm
- Two large 140mm fans in the front
- Additional 140 mm rear fan pre-installed
- Space for radiators up to 280/360 mm

The MasterCase MC600P from Cooler Master in detail
The MasterCase MC600P is designed to mount E-ATX, ATX, Micro-ATX or Mini-ITX motherboards. This housing has plenty of space in the interior and thus the possibility to accommodate up to three radiators. In addition to the classic slot on the back for a 120 or 140 mm heat exchanger, a 280/360 mm radiator can be installed in the front. The lid has a 240 or 280 mm radiator space. To install a surge tank or pump, there is an appropriate mounting location on the front removable part of the power supply cover. However, if cooling with water is not required, the Cooler Master MasterCase MC600P also offers more than sufficient cooling potential.

Two large 140mm fans already occupy one of the three slots in the front. Alternatively, three 120 mm fans can be accommodated here. A 140 mm fan is already pre-installed on the back, while two 120 mm fans can be mounted in the lid. Dust filters on the bottom, front and lid protect the hardware inside the case.

Ample space for media
Internally, there are slots for two 3.5-inch drives in the drive cage, which is located under the power supply cover, in which of course 2.5-inch drives can be accommodated. The cage can also be removed to make room for the pump and expansion tank to clear custom loops. Above are two external bays for 5.25-inch drives, which can be replaced with an optional HDD cage. Underneath, another HDD cage is attached, which is already enclosed in the case. In total, a maximum of ten 3.5-inch drives can be accommodated in the MC600P. For 2.5-inch drives, there are two more slots on the back of the motherboard tray. With optional SSD brackets, two additional SSDs can be accommodated on the power supply cover.

A lot of sense for details
Behind the left side wall made of tempered glass, the classically furnished interior shows and convinces with fine detailed solutions. There is plenty of space for graphics cards, but it can be up to 412 millimeters long if there is no HDD cage in the way, otherwise the cards can be 296 millimeters long. The power supply is hidden by a panel for a tidy interior and cool air is sucked through dust filters in the front and bottom. An opening in the mainboard tray allows you to change the cooler when the mainboard is mounted.

The processing is very high quality and the room layout leaves room for a potent system with lots of hardware. The CPU cooler may be 190 mm high and also for the power supply, the MasterCase MC600P more than enough space even for very powerful copies. For the cable management remained 25 to 35 millimeters of space.
Stylish RGB LED lighting and fan control
Nestled between the front and the sleek lid with beveled air intake is the expansive I / O panel, which can be hidden under a sliding lid, and each with two slots for USB 3.0 and USB 2.0 Type A and a microphone or headphone jack has significantly more than the usual connectors. The stylish lighting is provided by an RGB LED strip at the bottom of the front. A total of five 3-pin fans and a total of three 4-pin RGB LED strips can be connected to the controller. In addition, there are still switches for the fan speed and additionally for the RGB LED lighting, which is controlled by an enclosed controller.

Technical specifications:
- Dimensions: 235 x 544 x 548 mm (W x H x D)
- Material: steel, tempered glass, plastic
- Weight: 11.3 kg
- Color: Gray (case), Black (interior)
- Format: E-ATX (12 "x 10.7"), ATX, Micro-ATX, Mini-ITX
Fan:
- 1x 120 mm / 140 mm (back)
- 3x 120mm / 140mm (front)
- 2x 120 mm / 140 mm (top side)
Preinstalled:
- 2x 140 mm (front, 1,200 rpm)
- 1x 140 mm (rear, 1,200 rpm)
Radiator Mountings:
- 1x max. 280/360 mm (front side)
- 1x max. 140 mm (back)
- 1x max. 280 mm (top)
Drive Bays:
- 2x 5.25 inches externally
- 4x 2.5 inches / 3.5 inches internally
- 4x 2.5 inches internally
- Power supply (optional): ATX
- Expansion Slots: 7
I / O panel:
- 2x USB 3.0 Type A
- 3x USB 2.0
- 1x fan control
- 1x RGB LED control
- 2x audio
- Maximum graphics card length: 412 mm
- Maximum CPU cooler height: 190 mm