BitFenix Dawn TG A-RGB Midi-Tower, Tempered Glass - black [BFC-DAW-500-KKGSK-RP]

Behind the front made of coated tempered glass is a mesh with unique patterns that extends to the right side. The digitally addressable RGB lighting behind it emits light that is reminiscent of a sunrise shining through a window. The left side strip with large air inlets ensures good airflow. The top has a large honeycomb mesh with a magnetic dust filter under which a 240 radiator has space. Alternatively, the dust filter can be replaced with a solid cover.

BitFenix includes three quiet 120 mm fans in the case. The fan on the back comes from the in-house Specter series and is equipped with RGB lighting that bathes the interior, which is visible through the two tempered glass side panels, in a suitable light. In addition, the case can convince with enough space even for E-ATX mainboards and space for perfect cable management. The highlight, however, is the possibility of vertically installing the graphics card, which can also be up to 380 millimeters long.

The features of the BitFenix Dawn TG Midi-Tower at a glance:
- Extremely stylish midi tower for mainboards up to E-ATX
- Digitally addressable RGB LED lighting including controller on the front
- Front and both sides made of coated tempered glass
- I / O panel with 1x USB 3.1 Type C and 2x USB 3.0 & HD audio in / out & RGB switch
- Support for three radiators in 360/280, 240 and 120 mm format
- 2x 3.5 / 2.5 inch & 4x 2.5 inch disk slots
- 3x 120 mm fans pre-installed, 1x with RGB LEDs - a total of 7 possible
- Graphics cards up to 38 cm in length & CPU coolers up to 16.5 cm
- Stylish midi tower with exquisite RGB LED lighting and plenty of tempered glass

The exterior impresses with tempered glass on both sides and front. Bitfenix has implemented another innovation here, the tempered glass panes are provided with a protective film that is also used in the automotive industry. In the event of a break, it prevents the glass from splintering and should under no circumstances be removed. At the same time, the particularly clear glass remains extremely translucent and lets the RGB LED components shine through in all their glory. With a compatible mainboard, the RGB LEDs on the front, but also the lighting of the rear RGB LED fan, can be easily configured using software and synchronized with other RGB components in complex lighting effects. Alternatively, the integrated controller is available, which in turn is controlled via a switch on the I / O panel.

In the interior, the spacious midi tower mainboards can accommodate from mini-ITX to E-ATX format. Two 3.5 or 2.5 inch drives can be accommodated under the power supply cover thanks to the supplied brackets, while four further 2.5 inch data carriers disappear behind the mainboard tray. Hardware and cooling components are presented behind the left window in a particularly clean look, also thanks to the power supply cover, under which the power supply and tangle of cables become invisible. There is 28 millimeters of space for the cables behind the mainboard tray.

Lots of space for cooling and powerful hardware in the Bitfenix Dawn TG
On the back, the case is equipped with a 120 millimeter RGB fan, while in the front, two fans without lighting ensure a cooling airflow. In addition, two 120 mm fans can be installed in the lid and three in the front. Another can be attached to the floor behind the power supply. Two 140 mm models are also possible in the front or on the lid. The ventilation openings in the front, bottom and lid are all equipped with dust filters that can be removed without tools.

In the front, the Bitfenix Dawn TG can accommodate radiators in the 240 or even 360 or 280 millimeter format with a depth of 35 millimeters and a width of 141 millimeters. For large radiators, part of the PSU shroud can be removed. On the lid there is space for another radiator up to a size of 280 millimeters, on the back the pre-installed fan can be replaced by a 120 radiator. CPU coolers can be up to 16.5 centimeters high and powerful graphics cards fit up to 38 centimeters in length in the interior. The rear PCI bracket with seven horizontal slots can be replaced by an enclosed bracket with four vertical slots.

The protective film on the temper glass panels must not be removed.

Technical details:
Dimensions: 220 x 485.5 x 449 mm (W x H x D)
Material: steel, plastic, tempered glass
Weight: about 8 kg
Color: Black
Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total fans possible:
3x 120 mm / 2x 140 mm (front)
1x 120 mm (back)
1x 120 mm (bottom)
2x 120 mm / 140mm (lid)
Pre-installed:
2x 120 mm (front)
1x 120 mm (RGB LEDs, rear)
Radiator Mountings:
Max. 1x 360 mm or 1x 280 mm (front, max. 35 depth, max. 141 width)
Max. 1x 240 mm or 1x 280 mm (lid)
1x 120 mm (back)
Dust filter: lid, front, bottom
Drive Bays:
2x 3.5 / 2.5 inches (internal)
4x 2.5 inches (internal)
Power supply: 1x standard ATX up to 220 mm (optional)
Expansion slots: 7 or 4 with the enclosed replacement bracket
I / O panel:
1x USB 3.1 (internal connection)
2x USB 3.0 (internal connection)
1x per audio in / out
1x RGB control
1x reset
1x power
2x LED
Maximum graphics card length: 380 mm
Maximum CPU cooler height: 165 mm
RGB controller connections:
1x 4-pin RGB
2x 3-pin RGB
1x front button
1x SATA power cable
RGB Compatibility:
ASUS Aura Sync
ASRock Polychrome Sync
Gigabyte RGB Fusion 2.0
MSI Mystic Light Sync