The glass tube has an outer diameter of 75 mm and a wall thickness of 5 mm. Bases and covers the Aqualis series are made of Delrin, top and bottom are connected by a nickel-plated brass tube. A visual highlight is the integrated water column effect.
The return line is connected to the central terminal of Aqualis, the water flows through the central tube to the cover and brass occurs there through eight openings, which is particularly in conjunction with lighting an eyecatcher. A thin plexiglass plate near the bottom of the air decreases Aqualis entry into the circulation to a minimum. Alternatively, the return to a side port to be connected, the water then flows back out of the ground in the surge tank. For this configuration, a baffle plate is, in turn, ensures the adequate venting of the circuit.
The Aqualis XT versions also have an in ground integrated plexiglass window and provide space for the installation of up to six LEDs and are equipped with an electronic level measurement with USB and aquabus interface, a configurable alarm output and an external temperature sensor input. For monitoring and configuring the software is available for download aquasuite. The four-pole aquabus interface also allows direct connection to a aquaero 5 controller (not included).
The alarm output can be optionally configured as an artificial speed signal output for connection to a fan with speed signal analysis (eg the motherboard) or contact output, for example, to switch a LED on alarm. For alarm monitoring, in addition to the measured level is also the external temperature sensor input. The external temperature sensor input is compatible with all services offered by Aqua Computer temperature sensors.
Dimensions: 80 x 200 x 80 mm (W x H x D)
Weight: 400 grams
Scope of supply:
A surge tank
A screw plug G1 / 4 (pre-assembled)
An internal USB cable
A stainless steel bracket
A baffle plate made of stainless steel