Antec New Gaming NX500 Midi Tower, RGB, Tempered Glass - Black [0-761345-81055-5]

The housing is also suitable for water cooling, because a 360 mm radiator can be installed in the front and a 240 mm radiator in the lid. The innovative design with an edged plastic and mesh front panel, tempered glass side panel and stylish RGB lighting are highlights of the Antec NX500.

The features of the Antec NX500 Midi-Tower at a glance:
- Stylish ATX midi tower by Antec in black
- Stunning view of the hardware through tempered glass side panel
 -Stylish, addressable RGB LED lighting in the front
- Up to six 120 mm fans possible
- Space for 360 and 240 radiators
- Graphics cards up to 350 mm & CPU cooler up to 165 mm
- 2x 3.5 "/ 2.5" and 2x 2.5 "drives

The Antec NX500 Midi Tower in detail
The Antec NX500 has a stylish front bezel with a smooth plastic surface, an angled mesh bar and integrated RGB LED lighting. The case is completely in black and is dominated by an angular design language. The left side panel has a large area of tempered glass and provides a view of the installed hardware.
Options for air and water cooling
In total, up to six case fans can be installed in the NX500: Three 120 or 140 fans can be installed in the front. There are two 140mm or 120mm fans in the lid and a 120mm or 140mm model on the back panel. By default, a 120er ARGB fan is pre-installed on the rear panel of the case.

Also, the installation of water coolers was thought: In the front there is space for a 360er radiator, in the lid can be accommodated a 240 heat exchanger and on the rear wall, a 120er radiator can be attached.

Space for hardware components and drives
Graphics cards can be up to 350 millimeters long. CPU coolers can be installed in the Antec NX500 with a height of up to 165 mm, power supplies can be up to 200 mm long and disappear under a power supply cover. This makes for a tidy interior, as cables can be hidden easily and elegantly.

Under the power supply cover also sits a hard drive cage for up to two 3.5- / 2.5-inch disks. Two additional 2.5-inch SSD mounting locations are located on the back of the motherboard tray. In addition to ATX, Micro ATX and Mini-ITX motherboards, up to seven expansion cards can be installed in the housing.

The I / O panel is attached to the top of the Midi Tower. The panel has a USB 3.0, two USB 2.0 ports and two audio jacks. Three buttons for power, reset and the control of the integrated RGB LED lighting are also available here. The LED strip in the front can be connected and controlled via a 3-pin ARGB cable (5V) with an ADD header on the motherboard.

Technical details:
- Dimensions: 220 x 490 x 440 mm (W x H x D)
- Material: steel, plastic, tempered glass
- Weight: approx. 6.24 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
Total possible fan:
- 3x 140 / 3x 120 mm (front)
- 1x 120 mm (back)
- 2x 140 / 2x 120 mm (cover)
Preinstalled:
- 3x 120 mm, ARGB (front)
- 1x 120 mm, ARGB (back)
Radiator Mountings:
- 1x 360 mm (front)
- - 1x 120 mm (back)
Drive Bays:
- 2x 3.5 / 2.5 inches (internal)
- 2x 2.5 inches (internal)
- Power supply: 1x standard ATX (optional)
- Expansion Slots: 7
I / O panel:
- 1x USB 3.0
- 2x USB 2.0
- 1x 3.5 mm jack (audio out)
- 1x 3.5 mm jack (audio-in)
- 1x power button
- 1x reset button
- 1x LED mode button
- Maximum CPU cooler height: 165 mm
- Maximum graphics card length: 350 mm
- Maximum network part length: 200 mm