Antec New Gaming NX1000 Midi-Tower, RGB, Tempered Glass - Black [0-761345-81000-5]

The housing is also suitable for water cooling because a 360 mm radiator can be installed in the front and a 280 mm radiator in the lid. The elegant design, the tempered glass side doors and the stylish RGB lighting in the front are the highlights of the Antec NX1000.

The features of the Antec NX1000 Midi-Tower at a glance:
- Stylish ATX midi tower by Antec in black
- Stunning view of the hardware through the tempered glass panels
- Stylish, addressable RGB LED lighting in the front
- Up to six 120 mm fans possible
- Space for 360 and 280 radiators
- Graphics cards up to 370 mm & CPU cooler up to 180 mm
- 2x 2.5 "/ 3.5" HDDs and 2x 2.5 "SSDs
- Including LED controller for up to six ARGB signals (5V)

The Antec NX1000 midi tower in detail
The Antec NX1000 features a stylish tempered glass bezel with integrated RGB LED lighting. The case is completely black. Both side parts are swiveling and provided with tempered glass over a large area. As a highlight, the NX1000 also offers two vertical expansion slots for the high-edge mounting of a graphics card in addition to seven horizontal PCI expansion slots.

Options for air and water cooling
In total, up to six case fans can be installed in the NX1000: three 120 or two 140-inch fans can be installed in the front. There are two 140mm or 120mm fans in the lid and a 120mm model on the back wall. By default, a 120er ARGB fan is pre-installed on the rear panel of the case.

Also, the installation of water coolers was thought: in the front there is room for a 360er radiator, in the lid can be accommodated a 280 heat exchanger and on the rear wall, a 120er radiator can be attached.

Space for hardware components and drives
Graphics cards can be up to 370 millimeters long. CPU coolers can be installed in the Antec NX1000 with a height of up to 180 mm, power supplies can be up to 210 mm long and disappear under a power supply cover. This makes for a tidy interior, as cables can be hidden easily and elegantly.

Under the power supply cover also sits a hard drive cage for up to two 2.5- or 3.5-inch disks. Two additional 2.5-inch SSD mounting locations are located on the motherboard tray. In addition to ATX, mATX and Mini-ITX motherboards, up to seven expansion cards can be installed in the housing. In addition, the NX1000 comes with two vertical PCI expansion slots.

The I / O panel is attached to the top of the elegant case. The panel has two USB 3.0 ports and two audio jacks. Three buttons for power, reset and the control of the integrated RGB LED lighting are also available here. The pre-installed RGB LED controller allows the control of up to six digitally addressable RGB LED fans (3-pin RGB / 5V) and can be connected to an ADD header on the motherboard.

Technical details:
- Dimensions: 245 x 490 x 480 mm (W x H x D)
- Material: steel, plastic, tempered glass
- Weight: approx. 9.5 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
Total possible fan:
- 3x 120 / 2x 140 mm (front side)
- 1x 120 mm (back)
- 2x 140 / 2x 120 mm (cover)
Preinstalled:
- 1x 120 mm, ARGB (back)
Radiator Mountings:
- 1x 360 mm (front)
- 1x 280 mm (cover)
- 1x 120 mm (back)
Drive Bays:
- 2x 3.5 / 2.5 inches (internal)
- 2x 2.5 inches (internal)
- RGB LED Controller:
Connections:
- 6x 3-pin RGB (5VDG)
- 1x SATA power
- 1x MB-Sync (5VDG)
- Power supply: 1x standard ATX (optional)
- Expansion Slots: 7 + 2 (vertical)
I / O panel:
- 2x USB 3.0
- 1x 3.5 mm jack (audio out)
- 1x 3.5 mm jack (audio-in)
- 1x power button
- 1x reset button
- 1x LED mode button
- Maximum CPU cooler height: 180 mm
- Maximum graphics card length: 370 mm
- Maximum network part length: 210 mm