Alphacool NexXxoS ST30 Full Copper X-Flow Radiator - 240mm, black [14229]

The NexXxoS ST30 Full Copper X-Flow 240mm radiator from Alphacool is only 30 millimeters thick and consists almost entirely of copper. All water-carrying parts are therefore particularly heat-conductive. The radiator is surrounded by a black steel frame, which gives it a classy look.

The NexXxoS ST30 Full Copper X-Flow 240mm Radiator at a glance:
- 240 mm radiator from Alphacool in black
- Full copper structure with steel frame
- 30 millimeters high and 16 FPI
- All water-bearing parts made entirely of copper
- Up to four 120 mm fans in push / pull configuration possible
- Flexible crossflow design with 4x G1 / 4-inch threads

The NexXxoS ST30 Full Copper X-Flow 240mm Radiator in detail
The NexXxoS ST30 Full Copper X-Flow 240mm radiator is made almost entirely of copper. Not only the fins and channels are made of the extremely thermally conductive material, but also the antechambers. Designed for 120 mm fans, the radiator can accommodate a total of four fans in push / pull configuration. Thanks to its thickness of just 30 millimeters, it can also be used in cramped housings and, thanks to its full copper construction, ensures a decent cooling performance.

Thanks to the X-Flow design and the four G1 / 4-inch connections, you can choose between different inlets and outlets on the radiator. In this way, the radiator can be easily and flexibly integrated into the water cycle.

The fin spacing of 16 FPI (fins per inch) was chosen to achieve optimal cooling even with low fan speeds and without high static pressure. This means that a system that is both quiet and cool can be implemented. M3 screws for mounting fans and the radiator are included. Protective plates under the threads prevent the screws from being over-tightened and thus damaging the fins.

Technical details:
- Dimensions: 293 x 30 x 124 mm (W x H x D)
- Material: copper (antechambers, fins, channels), steel (frame)
- Color: Black
- Weight: 521 g
- Fins per inch: 16
- Connections: 4x G1 / 4 inches
- Fan Compatibility:
- 2x 120 mm (one side)
- 4x 120 mm (push / pull)
- Pressure tested: 1.5 bar
- Fan thread: M3
- Equipment:
- 8x M3 x 30 mm square screws
- 8x M3 x 35 mm square screws
- 8x M3 x 6 mm square screws