Aerocool Mecha-G-Bk-v2 [ACCM-PV28113.11]

With space for Mini-ITX, Micro-ATX and ATX mainboards and graphics cards up to 302 mm, full-fledged gaming PCs can also be implemented.

The features of the Aerocool Mecha v2 at a glance:
- Midi Tower for ATX, Micro-ATX and Mini-ITX
- Tempered Glass side panel
- Front with ARGB lighting with 15 modes
- Seven slots for graphics and expansion cards
- Graphics cards up to 302 mm, CPU coolers up to 159 mm
- I/O panel 2x USB 3.0 type A & RGB LED control
- Aerocool Mecha v2: Stylish midi tower with RGB lighting

The Aerocool Mecha v2 comes with showcase elements in a midi tower format. The black plastic front characterizes an eye-catching design. A vertical RGB strip illuminates the front effectively.

On the lid is the I/O panel with two USB 3.0 ports and a button to control the lighting effects. You can choose between 15 lighting modes with a button. Right next to it, the large side panel made of tempered glass allows a look inside the steel chassis and the hardware installed there.

Cooling with air and water
- A total of up to four case fans can be installed in the Aerocool Mecha v2: There is space for two 120 or two 140 mm fans in the front, a 120 mm fan can be installed in the cover and a 120 mm fan is already in the back of the housing installed at the factory. Tower coolers must not exceed a height of 159 mm. There is also the option of installing water cooling in the midi tower. The front can accommodate a 240mm radiator and the fan in the rear wall can give way to a 120mm radiator.

- A total of three data storage devices can be installed in the Aerocool Mecha v2. The drive cage on the bottom of the case offers space for two 3.5 or 2.5 inch drives. An additional 2.5-inch data carrier can be attached to the back of the mainboard tray. A length of 302 mm is planned for the installation of high-performance graphics cards. There is 18.9 mm of space for cable management.

Technical details:
- Dimensions: 205 x 442 x 370 mm (W x H x D)
- Material: steel, plastic, tempered glass
- Color: Black
- Form Factor: ATX, Micro-ATX, Mini-ITX
- Fan total possible:
- Front: 2x 120mm / 2x 140mm
- Rear: 1x 120mm
- Top: 1x 120mm
- Of which pre-installed:
- 1x 120mm fan (rear)
- Radiator Support:
- Front: 1x 120/240mm
- Rear: 1x 120mm
- drive bays:
- 2x 3.5/2.5 inches (internal)
- 1x 2.5 inch (internal)
- Power supply: 1x standard ATX up to 160 mm (optional)
- Expansion slots: 7
- I/O panel:
- 2x USB 3.0 Type A
- 1x USB 2.0 Type A
- 1x Reset/RGB LED Control
- 1x per audio in/out
- Maximum graphics card length: 302 mm (without front fan)
- Maximum CPU cooler height: 159mm