Zalman Z3 Iceberg Midi Tower - Black [Z3 Iceberg Black]

The cooling properties do not stay on the track, because the housing is suitable for numerous fans and large processor coolers. The ARGB lighting of the pre-installed fan can be controlled by the supplied controller via the button on the front panel or connect to a compatible mainboard.

The features of the Zalman Z3 Iceberg Midi Towers at a glance:
Chic Midi Tower in black
Side part made of tempered glass
Two preinstalled ARGB fans
Suitable for up to eight 120 mm case fan
Including ARGB controller with four 4-pin RGB connections

Zalman Z3 Iceberg: Chic Midi Tower with a lot of ARGB
The Zalman Z3 Iceberg is provided due to its compact air cooling dimensions, but can also be equipped with complete water cooling. In the front, a 140 ARGB fan is preinstalled. At the back of the housing, a 140 mm fan with digitally addressable RGB lighting is also preinstalled.

Optionally, two 120- or 140 mm fans can be attached to the lid and in the ground or on the power supply shaft two more 120 mm fans can accommodate. The front can record three 120 mm or two 140 mm fans. Thus, a total of eight 120- or five 140 mm fans as fully assembly are possible to make the fight at high temperatures. The Zalman Z3 Iceberg offers enough space for high-end CPU coolers with 163 mm.

The integrated RGB controller allows connecting up to four fans with 4-pin RGB plugs. By optional splitter cables, the controller can control up to eight fans. A dedicated button on the front panel allows setting the lighting effects. Alternatively, the controller can be connected to the 4-pin header of a compatible motherboard to enable synchronization with other RGB elements.

Zalman Z3 Iceberg: A home for powerful hardware components
On the mainboard tray of the Zalman Z3 Iceberg find small mini-ITX, micro-ATX, regular ATX and large E-ATX boards space (up to 280 mm). For graphics cards up to 315 mm length are provided. A total of seven horizontal expansion slots are available. Under the power supply cover, an ATX power supply with a length of a maximum of 210 mm can accommodate. The Zalman Z3 Iceberg offers from the factory a drive cage for two 3.5 / 2.5-inch drives and four separate 2.5-inch drive carriers, which can accommodate on the MB tray and the power supply shaft.

The design of Zalman Z3 Iceberg
Elegant is the front of the Midi Towers. The edgy design is simple and stylish at the same time. The left side part is made of tempered glass and allows the unobstructed view of the built-in hardware. The housing is kept completely completely in black. The power supply shaft ensures a tidy heart, as he skilfully hides the power supply and its connection cables.

Extensive connection variety
The I / O panel of the Zalman Z3 Iceberg is equipped with two USB-3.0 and USB 2.0 ports. In addition, there are two 3.5 mm jack sockets, which acts as a headphone output and the other as a microphone input. In addition to Power and Reset Buttons, there is also a key for controlling the RGB lighting.

Technical details:
- Dimensions: 210 x 480 x 410 mm (W x H x D)
- Material: steel, plastic, tempered glass
- Weight: approx. 6.4 kg
- Color: Black
- Form factor: E-ATX (up to 280 mm), ATX, Micro-ATX, Mini-ITX
- Total fan possible:
- 3x 120 / 3x 140 mm (front)
 -2x 120 / 2x 140 mm (lid)
- 1x 120 / 1x 140 mm (back)
- Preinstalled by this:
- 1x 140 mm ARGB (front)
- 1x 140 mm ARGB (back)
- Filter: Front, floor, lid (removable)
- Radiator mountings (partially waiver of ODD / HDD cage):
-  1x max. 360/280 mm (front)
-- 1x max. 240 mm (lid)
- 1x max. 120 mm (back)
- Drive shafts:
- 2x 3.5 / 2.5 inches (internal)
- 4x 2.5 inches (internal)
- Power supply: 1x Standard ATX (optional)
- Expansion slots: 7
- I / O panel:
- 2x USB 3.0
- 1x USB 2.0
- 2x 3.5 mm jack (audio in / out)
- 1x LED Control Button
- 1x power button
- 1x Reset Button
- Maximum CPU cooler height: 163 mm
- Maximum graphics card length: 315 mm
- Maximum power supply length: 210 mm