Singularity Computers Protium 2.0 ARGB 150 D5 Reservoir Combo without pump - acrylic, black [SC-P2-150C-ACBK]

- 150 mm tube made of transparent acrylic glass (Ø60 mm)
- Lid and base attachment made of acrylic
- Stable aluminum locking rings
- A total of seven G1/4 inch ports
- Stylish D5 pump housing
- Flexible mounting options
- Customizable: interchangeable parts and optional accessories
- Customizable RGB lighting

With this set you get an expansion tank from Singularity Computers with a 150 millimeter tube and two acetal attachments. The reservoir with a diameter of 60 millimeters is made of transparent acrylic, as are the two attachments. The unique 90 degree pump top design allows for more mounting and connection options than ever before. A total of seven G1/4 ports provide extensive options for integration into a water circuit. The combination is rounded off by the stylish D5 pump housing from the Protium series. A corresponding pump can be purchased separately.

This set has a total of seven G1/4 inch ports. There are 3 outlet and 4 inlet connections, which are located in the pump attachment and in the lid attachment. The connections are placed so that two 16-millimeter hard tube connections fit next to each other without any problem. An included riser tube provides additional options for creating a circuit, as a port in the lid can also serve as an outlet.

The stylish pump housing from the Protium 2.0 series from Singularity Computers is used to cover the D5 pump and, above all, enhances the setup visually. It gives the pump a firm hold and dampens the noise it emits. The openings in the cover of the pump housing are used for cable routing.

Technical details:
- Dimensions: 78x 250 x 90 mm (W x H x D)
- Surge tank:
- Tube height: 150 mm
- Diameter: 60mm
- Material: Acrylic (lid, base), acrylic glass (reservoir), aluminum (mounting plates and rings), stainless steel (screws)
- Connections:
- 7x G1/4 inch
- 1x 3-Pin RGB (5VDG, 5V))
- Cable length:
- 500mm
- Scope of delivery:
- 1x Protium expansion tank (150 mm)
- 1x D5 pump housing with locking ring
- 1x Protium 2.0 Pump Top (pump attachment)
- 1x Protium 2.0 reservoir cap (lid)
- 1x Protium 2.0 ARGB D5 cover
- 1x Protium 2.0 inlet pipe
- All necessary screws and fasteners