Silverstone SST-SEQ1B SETA Q1 Midi-Tower - black [SST-SEQ1B]

Mainboards up to SSI-EEB can be installed
Versatile cooling system possible
4x 2.5 inch SSDs and 2x 3.5 inch HDDs
Insulated housing with clever airflow system

The Silverstone SETA Q1 Midi-Tower in detail
The Silverstone SETA Q1 Midi-Tower brings the mobility and power of a knight to your desk. Its steel armor protects not only your hardware, but also your ears. The materials dampen the sound and at the same time optimize the airflow in the housing. At the front two 140 mm fans are pre-installed, on the back one. The interior offers enough space for cornboards in a size from Mini-ITX to SSI-EEB and radiator with a length of up to 360 mm.

Silverstone SETA Q1: Space to make dreams come true
A lot can be achieved in the Silverstone SETA Q1 Midi-Tower. Graphics cards can be installed up to a length of 394 mm - horizontally or vertically. For vertical installation, the case offers two expansion slots (7 + 2 PCI slots), so that the graphics card can either be mounted with enough space to the side panel or there is still free space behind the graphics card for other plug-in cards . The tower is also suitable for very large motherboards up to the SSI-EEB standard and supports the cooling of the hardware for CPU coolers up to a height of 182 mm.

On request, you can also use water cooling. Radiators with a length of up to 360 mm fit in and can be mounted on the front or in the lid.
Alternatively, you can of course attach three 120/140 mm fans to the front, three 120 mm or two 140 mm in the lid and a 120/140 mm fan to the back.

Important! There are front (two) and top (one) 140 mm fans already pre-installed and can be laid if necessary.
To the right of the board, two SSDs of 2.5 inches can be attached.

The same applies to the other side under the CPU recess - so four 2.5 inch SSD can be accommodated in the case. The HDDs, on the other hand, are locked in their own cage next to the power supply, in which two pieces with 3.5 inches fit in. The PSU must not exceed 250 mm in length.

In the peace lies the power
Particularly noteworthy is the use of sound of twilight materials. The front in particular is designed in such a way that sound fades away in a cage-like construction. This results in a noise reduction at small omissions on the side, in which air is also sucked in. The design is based on gaining power from silence - a balance of airflow and minimal sound is created. To ensure that the clear lines are not interrupted, the I / O panel is located on the outer edge of the lid.

It is equipped with one USB-C, two USB 3.0 and one audio input and output.

Technical details:
Dimensions: 232 x 490.7 x 493.5 mm (W x H x D)
Weight: 11.64 kg
Material: steel, plastic
Color: Black
Form factor: SSI-EEB, SSI-CEB, E-ATX, ATX, Micro-ATX, Mini-ITX
Total
fan possible: 3x 140 / 3x 120 mm (front)
2x 140 /
3x 120 mm (lid) 1x 140/120 mm
(back) Of which pre-installed:
2x 140 mm in the lid
1x 140 mm in the back
Radiator mounts: 1x max. 360 mm in the lid or front
Filter: bottom (removable)
Drive bays:
2x 3.5 inches
4x 2.5 inches
Power supply: max. 250 mm length
Expansion slots: 7 + 2 (horizontal + vertical)
I / O panel:
1x
USB-C 1x USB
3.0 1x 3.5 mm jack (4-pin,
TRRS,
for microphone / headphones) 1x power button 1x reset button
Maximum graphics card length: 394 mm (with fans installed)
Maximum CPU cooler height: 182 mm
Scope
of supply: 5x cable
ties with Velcro fastener 1x graphics card holder for Nvidia 30 series
1x dust filter upper cover