NZXT Kraken X63 RGB Complete Water Cooling - 280mm, white [RL-KRX63-RW]

In addition to a new design for fans, pumps and radiators, the X63 RGB features stylish RGB lighting, high static pressure, lower volume and amplified hoses for increased durability. The pump itself is equipped with a small infinity mirror and allows a variety of lighting options, which can be adjusted directly on the desktop in addition to the settings for the pump via the advanced CAM software.

The NZXT Kraken X63 RGB complete water cooling at a glance:
Complete Wakü system with easy installation
280 mm aluminum radiator
Two 140 mm fans (AER RGB 2) included
Pump and fan with RGB lighting
Rotatable LED lighting effect on the pump
With control and control option via CAM software
High compatibility with AMD and Intel
Pump, fan & cooling performance

The NZXT Kraken X63 RGB relies on a dual radiator made of aluminum in 280 mm format. The cooling capacity and the resulting volume are not only controlled by the fan speed of the supplied 140 mm fans, but also by the motor speed of the pump, which can be between 800 and 2,800 rpm. As usual, the pump is integrated into the Rear of the CPU cooling block, which rests with its copper surface on the AMD or Intel processor. NZXT uses two of their modern Aer-P fans in 140 mm format to cool the radiator.

The angled air inlet and outlet openings as well as the winglet fan blades minimize air resistance and increase fan performance as well as static pressure. The copper fluid dynamics bearings used give the Aer RGB 2 fans an extended service life of over six years. In addition, they ensure uniform lubrication at all times, which noticeably reduces the background noise during operation.

The pump is connected to the motherboard via USB, the speedometer signal is read out via a 3-pin fan header, which is also connected to the
motherboard. The NZXT Kraken X63 RGB is powered by a SATA power connector. The RGB lighting of the fans is connected to the pump via a daisy chain and the fans via another daisy chain with a 4-pin PWM connector of the motherboard.

Infinity Mirror, RGB Lighting & CAM software
In terms of design, NZXT has come up with something very special. On the back of the cooling block is a stylish RGB lighting with infinity mirror, which creates a fantastic effect. With this illumination, it is possible to illuminate the NZXT lettering as well as the circular LED strip in a wide variety of colors and effects depending on the user's ideas and preferences. Due to the rotatable top, the logo can be aligned in the desired position, depending on the direction in which the cooler is mounted. The Aer RGB 2 fans are also equipped with ring-shaped RGB LED lighting. With the CAM software, NZXT gives the user the ability to adjust pump and fan performance themselves.

So if you want to adjust the balance between cooling and volume or between pump and fan speed instead of relying on the out-of-the-box settings, the KRAKEN X63 RGB has the option. In addition, current water and CPU temperature are also specified here and it can be switched between different profiles. The Kraken X63 RGB is pre-filled and delivered with already applied thermal compound on the CPU contact surface.

Thanks to the nylon sheathed hoses with a length of 40 cm, the radiator can be flexibly positioned on two adjacent 140 mm fan slots in the housing.

Technical details:
Radiator:
Dimensions: 315 x 143 x 30 mm (W x H x D)
Material: aluminum
Color white
CPU cooler / pump:
Dimensions: 80 x 55 mm (W x H)
Water block material: brass + plastic
Base plate material: copper
Speed: 800 - 2,800 rpm +/- 300 rpm
Volume: N / A
Connections:
1x 4-pin PWM (pump control)
1x 3-pin RGB (5V)
Hoses:
Length: 400 mm
Material: rubber (nylon sheath)
Connections: 90 degrees angled, rotatable
Fan:
Type: 2x 140 mm (Aer RGB 2 140 mm)
Speed: 500 - 1,500 rpm +/- 300 rpm
Delivery volume: max. 155 m³ / h
Static pressure: 0.17-1.52mmH2O
Volume: 22 - 33 dB (A)
Connections:
4-pin PWM
NZXT RGB (proprietary)
Compatibility:
Intel socket: LGA 1200, 115X, 1366, 2011, 2011-3, 2066
AMD socket: AM4, sTRX4 *, TR4 * (* Threadripper bracket not included)
Scope of delivery:
1x NZXT Kraken X63 RGB complete water cooling
2 x 140mm fans
1x fan splitter cable
1x fan connection cable
1x micro USB cable
1x daisy chain cable
1x breakout cable set
Mounting accessories for specified bases
Mounting screws for fan and radiator
Manufacturer's guarantee: 6 years