Lian Li UNI FAN TL LCD Series Reverse Blade Fan - 140mm, black [14RTLLCD1B]

Practical plug-in system and improved daisy chaining for less cable clutter
32 digitally addressable RGB LEDs
Speed and lighting can be controlled via Lian Li L-Connect 3 software
Max. 1,600 rpm speed at 29.4 dB(A)
108.7 m³/h max. delivery volume and max. 3.1 mmH2O static pressure
Rubber pads to decouple annoying vibrations

Note: A Lian Li 12TL fan controller is required for this fan. The fan offered here can be used as an extension for the corresponding 3-pack, which includes the controller. The Lian Li 12TL fan controller is also available individually. A direct connection to the mainboard is not possible.

Lian Li UNI FAN TL LCD Series Reverse Blade: Intake fan to complement your setup
The reverse blade version of the Lian Li UNI FAN TL LCD Series is an intake fan that fits perfectly into your setup with conventional Lian Li UNI FAN TL LCD Series. The PWM fan uses the same connector system that frees gaming PCs from unnecessary cable clutter. Lian Li also impresses in terms of cooling performance and sets new standards with breathtaking RGB lighting.

With the Lian Li UNI FAN TL LCD Series reverse blade fans, you can create airflow in the opposite direction while still showcasing the fan's stylish hub side. This ensures that you always see the good side of the fan despite the reversed airflow - for a uniform look in your case.

PERSONALIZE YOUR FANS WITH LCD
A 1.6-inch display with a resolution of 400 x 400 pixels is attached to the hub of the Lian Li UNI FAN TL LCD Series, which can be configured almost freely. For example, fan speed, temperature or CPU and GPU utilization can be displayed there. Or you can upload your own pictures, GIFs or small videos using the L-Connect 3 software to give the fans your own personal touch. Lian Li points out that the more sensors are used, the more the CPU is required and therefore no more than three sensors should be used.

Plug-in system for seamless fan clusters
The assembly of the Lian Li UNI FAN TL LCD Series follows the clever concept of the other fans from Lian Li: The fans are equipped with contact points and are connected to each other using a practical plug-in system. Several fans can be combined into a cluster and conveniently connected to the controller with just one cable. Thanks to this improved daisy chain system, you save time, nerves and prevent unnecessary cable clutter. The pin contacts pass on power as well as PWM and ARGB signals.

REVISED CONNECTOR SYSTEM OF THE LIAN LI UNI FAN TL LCD SERIES
The plug-in system introduced with the UNI FAN SL and AL series has been further improved in the Lian Li UNI FAN TL LCD series. On the one hand, the plug-in system was designed so that the connecting plug can be removed. This prevents possible collisions with connections on the radiator and at the same time ensures a tidy look.

In addition, the connection for the cable module has been removed; instead, the cable can now be connected directly to the fan. The connection is embedded flat in the frame, so you have more space for using radiators.

The usually separate cables for power and ARGB signals have been combined into a 7-pin cable. You can connect these cables directly to the controller. Up to four fans in a cluster can be powered with one cable. With the appropriate extension cable, you can connect up to 6 fans with LCD to the two ports of the controller and control them via L-Connect 3 software. The Lian Li 12TL controller is included in the three-pack. It is also available individually.

Note: The Lian Li UNI FAN TL LCD Series connectors are not compatible with the SL and AL series!
Lian Li UNI FAN TL LCD Series Reverse Blade: Impressive performance values
The intake fans work relatively quietly under full load with a maximum of 29.4 dB(A). The small distance between the fan blades and the frame and the resulting reduced friction resistance allows higher speeds with the same energy consumption and, as a result, a significantly increased air flow and excellent performance values. Cool temperatures are also favored by the increased height of 28 millimeters.

The start/stop mode for your Lian Li UNI FAN TL LCD Series can also be activated using the L-Connect 3 software. If your components are below a temperature you specify (maximum 50 degrees), the fans will stop. In addition, L-Connect 3 offers the option of creating an optimized fan curve for speed and temperature.

Technical details:
- Dimensions: 144 x 140 x 28 mm (W x H x D)
- Material: Plastic
- Color: Black
- Bearing: Hydrodynamic plain bearing
- Speed: 0 - 1,600 rpm
- Volume: max. 29.4 dB(A)
- Delivery volume: max. 108.7 m³/h
- Static pressure: max. 3.1 mmH2O
- Voltage: 12V
- Starting voltage: 5V
- Power consumption: 6.72W
- Lighting:
- Type: digital addressable RGB
- Quantity: 32 LEDs
- Display:
- Type: IPS
- Size: 1.6 inches
- Resolution: 400 x 400 pixels
- Brightness: 500 cd/m²
- Colors: 24-bit SRGB
- Connection: 7-pin combined PWM and ARGB