- Space for graphics cards up to 385 mm, CPU coolers up to 180 mm and power supplies up to 200 mm
- A 420mm radiator on the front and a 360mm radiator in the lid possible
- I/O panel with one USB-C, two USB 3.0 and one USB 2.0 port as well as HD audio
- Large mesh front supports the airflow
- With a total of four pre-installed 120mm PWM fans with ARGB LEDs
- Includes controller for fan control and lighting
The Kolink Citadel Mesh ATX ARGB Midi Tower in detail
Citadels are the centerpiece of a castle. In the Kolink Citadel Mesh ATX Midi Tower, your hardware components are well hidden. The case offers the best possible airflow for your gaming hardware. With its large mesh front and four pre-installed 120mm ARGB PWM fans, Kolink lays the foundation for your new gaming setup in the beloved RGB design. Thanks to ARGB, each LED can be controlled individually, which enables individual and unique looks. Through the tempered glass side door, you always have your hardware in view.
Space is used creatively
The interior is completely in black. The chassis uses every opportunity to organize your hardware components in the best possible way, so the power supply cover contributes to a tidy look. Underneath is the hard drive cage, which has room for two 3.5-inch or 2.5-inch drives. Two more 2.5-inch SSDs can be mounted on the back of the motherboard tray. For cable management, it offers numerous openings together with the power supply cover. The standard ATX power supply is mounted on a removable dust filter.
Graphics cards up to a length of 385 mm fit into the midi tower. CPU coolers must be a maximum of 180 millimeters high. Motherboards, on the other hand, reach up to the E-ATX format.
There are 7+3 PCI slots. Accordingly, a graphics card up to 3 slots high can be installed vertically. On the I/O panel in the lid, there are two USB 3.0 Type A ports, a USB 2.0 port, a USB 3.1 Type C port and an audio port.
Airflow meets performance
The Kolink Citadel Mesh ATX ARGB Midi Tower comes with four 120 mm Kolink Umbra ARGB PWM fans. You can find three of them at the front, one at the back. The fans offer good performance and can be connected to 4-pin fan slots on the motherboard. An ARGB/PWM controller is included in the case, on which six fans can alternatively be installed. The advantage of pulse width modulation is the automatic control of the speed of the fans, which adapts cooling to the required power.
Cool as you like
The front is mostly made of mesh and contributes significantly to the good airflow of the case. The Kolink Citadel Mesh Midi Tower can take full advantage of seven 120 mm fans.
You don't have to leave it at the 120 mm fans: alternatively, you can replace them with three 140 mm fans on the front, two in the lid or one in the back panel. For water-cooled systems, radiators up to 420 mm in the front and 360 mm in length in the lid fit in. This allows high-end components to be excellently cooled.
At the top there is a magnetic dust filter over the mesh with honeycomb pattern. It also prevents dust from entering your system.
Specifications:
- Dimensions: 231 x 485 x 460 mm (W x H x D)
- Materials: steel, tempered glass
- Weight: 7.88kg
- Color: Black
Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total fans possible:
- Front: 3x 120 / 140mm
- Cover: 3x 120 / 2x 140 mm
- Back: 1x 120 / 140 mm
- Of which pre-installed:
- Front: 3x 120mm
- Back: 1x 120mm
Radiator mounts:
- Lid: 1x max. 360 mm
- Front: 1x max. 420 mm
- Filter: bottom (removable), lid (magnetic)
Drive bays:
- 2x 3.5" / 2.5"
- 2x 2.5in (removable brackets)
- Expansion slots: 7 + 3 (horizontal + vertical)
I/O panel:
- 1x USB 3.1 (Type C, USB 3.2 Gen 1, max. 5 Gbit/s)
- 2x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
- 1x USB 2.0 (Type A, max. 480 Mbit/s)
- 1x 3.5 mm jack (4-pin, TRRS, for microphone/headphones)
- 1 x power button
- 1x reset button
- 1x LED control
- Maximum graphics card length: 385 mm (with fans installed)
- Maximum CPU cooler height: 180mm
- Power supply: max. 200mm length
Scope of supply:
- 1x Kolink Citadel Mesh ATX ARGB midi tower
- 4x 120mm ARGB PWM fans
- 1x ARGB/PWM controller
- 13x rubber grommets
- 4x Velcro straps
- 2x cable ducts