Jonsplus i400 ATX case, tempered glass - black [i 400 BG]

- Elegant design made of aluminum and tempered glass
- Two side panels made of tempered glass
- Modular structure with flexible design options
- Space for radiators up to 360 mm
- A total of up to seven 120 mm fans possible
- Space for up to seven drives
- Compatible with E-ATX motherboards
- Minimalist ATX case in a contemporary design

The ATX case i400 from Jonsplus relies on an elegant design made of aluminum and tempered glass. The ATX representative from the Jonsplus i series combines the minimalist, elegant design of the series with enough space for full-fledged gaming hardware and enormous cooling potential.

Externally, the Jonsplus i400 impresses with its elegant design made of brushed aluminum, two tinted side panels made of tempered glass and its flawless workmanship. Feet made of sandblasted aluminum complete the tasteful appearance and provide enough fresh air on the underside. Inside, the ATX case is extremely flexible and can accommodate a lot of gaming power.

Unrestricted view of your gaming hardware
The structure of the case is ideally suited to show off the graphics card through the tempered glass side panel. The interior allows the installation of a large CPU air cooler up to 168 mm in height along with a high-end graphics card up to 340 mm long and a full-blown ATX power supply behind the front cover.

The case offers enough space to install an E-ATX mainboard. This works without problems up to a width of 280 mm. From a length of 330 mm, the cable bushings are covered. Six 3.5-inch and one 2.5-inch slots are available for data carriers. Alternatively, two 3.5-inch and five 2.5-inch drives can be installed.

35mm of space behind the mainboard tray is also reserved for cable management. An additional cover ensures that the power supply cable cannot be seen through the tempered glass pane. The housing feet are also modular and their length can be adjusted to the needs of the system. The highlight: higher housing feet make it easier to suck in fresh air through the bottom of the housing.

A breath of fresh air for your PC setup
For case fans, there is space for three 120mm or two 140mm fans in the top and bottom, while the back can accommodate another 120mm fan. Alternatively, radiators can also be installed: 360 mm in the lid or 240 on the floor.

The airflow design of the i400 takes advantage of the natural chimney effect. The generous openings in the base and in the lid - supported by the fans - create a draft from bottom to top, which benefits all built-in components. The removable filters in the bottom, top and back of the Jonsplus i400 keep the inside clean and dust-free.

Technical details:
- Dimensions (without feet): 231 x 480 x 502 mm (W x H x D)
- Feet: 25 mm (adjustable)
- Material: aluminum, steel, plastic, tempered glass
- Weight: 11.5kg
- Color: Black
- Form factor: ATX
- Mainboard compatibility: Mini-ITX, Micro-ATX, ATX, E-ATX (up to 330 mm)
Fan total possible:
- 3x 120 mm / 2x 140 mm (lid)
- 3x 120 mm / 2x 140 mm (bottom)
- 1x 120 mm (rear panel)
- Fan pre-installed: none
- Dust filter: top, bottom, rear panel (removable)
- Radiator mounts:
- 1x 360 / 280 mm (lid)
- 1x 240 mm (floor)
drive bays:
- 6x 3.5 inch + 1x 2.5 inch / 2x 3.5 inch + 5x 2.5 inch
- Power supply: ATX (optional)
- Expansion slots: 7 (rotatable slot cover)
I/O panel:
- 1x USB 3.0 Type A
- 1x USB 3.1 Type-C
- 1x 3.5 mm jack (audio out)
- 1x 3.5 mm jack (audio in)
- 1x power button
Special feature: vertical GPU mounting possible, riser cable available separately
- Compatibility graphics card: max. 340 mm length
- Compatibility CPU cooler: 168 mm height
- Compatibility power supply: 185 ~ 270 mm